Important notice:
The Receiver Collar works only if it is correctly encoded with Remote Transmitter, therefore, please follow the setup steps in User Manual carefully when you use the tool for the first time.

belt dog,arnes correa perros,correa retractil perro,clicker for dogs

Description:

1. Antenna: transmit the signal to Receiver Collar

2. LED lamp: the lamp will light when you press the button of LED light

3. LED Indicator lamp: the light will flash when the transmitter is working. The lamp will light when it is being charged.

4. LCD Screen:

Static mode: under this mode, press "Y" button, Receiver will shock; press up/down button, can adjust the level of Static shock from 0 to 100.

Vibration mode: under this mode, press “Y” button, Receiver will vibrate; press up/down button, an adjust Vibration level from 0 to 100.

Beep mode: under this mode, press "Y" button, Receiver collar can get beep sound.

Light mode: under this mode, press "Y" button, the green LED light in the Receiver will flash every one second, it is convenient to let you know where your pet is.

Channel 1: select to encode between transmitter and one of receiver collar

Channel 2: select to encode between transmitter and 2nd of receiver collar

5. Up/down button: intensity level button for Vibration and Static Shock

6. LED lamp button: when pressing the LED light button, the lED lamp in the Transmitter will light

7. Channel button: press the button, can select to encode between transmitter and one of receiver collar, or another one

8. Launch button: after you finish mode select, press this button for confirmation.

9. Mode button: include 4 modes: Static Mode, Vibration Mode, Beep Mode and LED lamp mode

10. Charging hole: charge for Remote Controller

11. Contact points: deliver the safe static correction

12. Rest hole: turn on/off the receiver

13. DV-5V hole: charge for receiver

Features:

100% Brand New and High Qualit
With compact portable design
Easy to use, ergonomic transmitter.
Waterproof for training in bad weather and keep the inside of collar against wet.
Rechargeable collar with USB Charge cable
Rheostat’s dial that allows to gradually increasing the stimulus intensity within 0-100 levels
4 training modes: static shock/vibration/beep/light
Two dog modes allow the trainer to control two different dogs from one transmitter.
Featured power saving design with automatic standby and memory function
No external antenna on the collar receiver
Reduced receiver/collar is ideal for small/medium size dogs
The liquid crystal digital display let the operation become simple

Specification:

Frequency: 433.825MHz
Transmitter: 3.7V 500ma Lip
Receiver: 3.7V 500ma Lip
Color: Black
Package weight: 10.0 oz

How to use:

1. Charge the remote transmitter/receiver:

1) Connect the charger's connector to the charging jack (DC-5V hole)

2)Connect usb cable for charging

3) The red light on the transmitter will be lighted

4) Charge the transmitter/receiver at least 6 hours for the first charge

5) After fully charged, the red LED lamp will be turned off automatically (Important note: Low battery indicator: the symbol will show on the LCD screen)

2. Connect transmitter and receiver:

1) Turn on the transmitter by pressing any button on the transmitter

2) Press "1/2" button to choose channel for connection, choose channel 1 for the first receiver

3) Lift the rubber cover of the Reset part on the receiver. Press the Reset button inside of the receiver with a pen or paper clip, and the green LED light will turn on

4) After a Beep came from the receiver, press the "Y" button on the transmitter within 10 seconds

5) The collar receiver will beep if successfully connected

6) Press "1/2"button to encode, choose to channel 2 for second collar by the same procedure

Important notice:

1. The transmitter will go into Standby Mode after 20 seconds if there is no operation and turn off after 20 minutes

The receiver will go into Standby Mode if unused for 4 minutes. Any movement will activate the receiver.

2. "1/2" button to choose channel for connection. In channel 1, can only train the first receiver, in channel 2 train the second receiver

3. In working mode, if you want to reconnect the receiver, simply use a pen or paper clip, press the reset button, there is a beep sound that indicates that it’s ready to encode

4. The receiver is designed to be waterproof. The rubber cover has to be put in the right position

Note:

1. The lifetime of the batteries depends on how often you use the product. Therefore you should often check the batteries by hear the beep from the Collar Receiver and watching the indicating on the LCD screen of the transmitter

2. The valid distance of remote control means the straight-line distance between the transmitter and the Collar Receiver without obstacle. If there is interference signal or signal screening around, the actual remote control distance may be various.

3. This product is for pet training. Only by training, the pet can understand the intention of it power. Good effect can only be achieved after a period of training

4. Training session should be kept positive and short, about 10-15minutes long each time.

5. Presently, this product is the most effective and the safest tool for pet training. Follow the correct operational instructions, you can effectively train the pet and bring it no harm.

What is included:

1xCollar Receiver

1xController

1xUser manual

1x Test light

2xLong metal probes

2xShort metal probes

Warm Notice:

1. Both Remote Transmitter and Receiver Collar are energy-saving designed. The Remote Transmitter will go into STANDBY MODE if there is no operation after 1 minute, and by pressing Mode button you can activate the transmitter from Standby mode. The Receiver Collar will go into Standby mode if no operation for 4 minutes. And any movement will activate the Receiver.

2. A startup roller is contained in Receiver Collar, so you will hear sound when the collar is shaking, don't mistake it as any parts falling off.

Encode signal transmission between Remote Transmitter and Receiver Collar:

1. Press Mode button to turn on Remoter Transmitter and adjust levels of Vibration and Static above 0.

2. Press “1/2” button to select a signal channel.

3. Open the rubber cap and press the switch button inside Receiver, which beeps once to indicate the Receiver is on.

4. Press Y button within 10 seconds to encode the signal, at the same time, the Receiver beeps once.

5. If you fail to press Y button within the 10 seconds period, please repeat steps above.

6. If you have 2 Receiver Collars, press again “1/2” button to select another signal channel for transmission encoding.

You need charge this product before you start using it for the first time.

How to charge Remote Transmitter:

1) Connect Remote Transmitter to a charger into a standard socket.

2) LED Indicator on Remote Transmitter turns red when charging.

3) Once Remote Transmitter is fully charged, the red LED indicator turns off automatically.

How to charge Receiver Collar

1) Open the rubber cap, connect Receiver Collar to a charger into a standard socket.
2) LED Indicator on Receiver Collar turns red when charging
3. After being fully charge, LED indicator turns yellow and goes into Standby mode if there is no movement.

Warm Notice:

1) Charge the Remote Transmitter and Receiver Collar at least 6 hours for the first charging.

2) Functions of Receiver Collar are disabled and out of control of Remote Transmitter when being charged.

3) Low battery indicator symbol will be displayed on LCD screen.

4. Receiver Collar keeps beeping continuously if its voltage is under working level.

5) This product is rechargeable. To maintain its proper functions, please charge once a monthly if it is not used.

Warm Notice:

Remember your signal channel setup and don't change it frequently, otherwise remote control does not work!

Test Pet Trainer Training Collar
Static Shock function test

As static function is invisible to our naked eye, please use test light to verify the function.
First press Mode button to switch to Static mode. You can press UP/DOWN button on the right to confirm LCD index is above 0, as shown in the figure.
Press Y button on Remote Transmitter to see if the test light is on.

Vibration function test:

First press Mode button to switch to Vibration mode. You can press UP/DOWN button on the right to confirm LCD index is above 0.
Press Y button, the Receiver Collar will vibrate.

Beep alert function test:

First press Mode button to switch to Beep mode. No adjustment is needed under this mode, therefore LCD index displays 000.
Press Y button, the Receiver Collar will beep.

LED flash function test:

First press Mode button to switch to LED Light mode. No adjustment is needed under this mode, therefore LCD index displays 000.
Press Y button, the LED light on Receiver Collar will flash red continuously.
Please install nylon collar in accordance with the illustrated figure.

How to wear Receiver Collar correctly:

1. Correct wearing position helps healthy and effective pet training. Receiver shall be placed on bottom of your pet's neck, and the screw cap must contact pet's skin directly.
2. If your pet has a thick fur in the neck place, please use longer screw caps.
3. A spacing to hold a finger shall be maintained between Receiver Collar and your pet's skin. However the Receiver Collar can't be too loose, otherwise static effectiveness shall be badly influenced.
4. Too long Receiver Collar can be trimmed, or be handled with other methods.

Pet Trainer shutdown:

1. Remote Transmitter is energy-saving designed. The Remote Transmitter goes into Standby mode after 1 minute without movement, or you can press and hold Mode button for 3 seconds to shutdown.
2. Receiver Collar is energy-saving designed. The Receiver Collar goes into Standby mode after 4 minutes without movement, Press and hold for 3 seconds the switch inside Receiver Collar to shutdown

Attention:

1. High-end transmission technology is used in the remote control Transmitter, therefore you need not aim directly at Receiver Collar, the signal can go through obstacles such as walls and other things, however, the effective distance will be decreased.
2. A list of factors, including but not limited to signal station, magnetic field, obstacle, battery volume, other wireless devices nearby, landform, vegetative cover, etc, shall also influence transmission of signals from remote transmitter and the actual effective distance of the Remote Transmitter.
3. This product is a pet trainer. Therefore, your pet can understand your intention only through actual training activities. Good outcomes could be achieved only after certain period of intensive training.
4. Keep active training, and each training shall not be too long, 10-15 minutes is suggested.
5. Currently, our product is the most effective and safest pet training tool in the market. Follow the correct training steps, you can get your pet effectively and successfully trained without being harmed.
6. Any other questions, please don't hesitate to contact us or our local dealers.

Regular maintenance:

Please examine regularly to ensure tightness of Remote Transmitter and eliminate any external damages.
Clean the screw caps with alcohol weekly.
Examine your pet's neck and carry out weekly cleanup.