6001

Toolmaker’s Ink Blue
Aerosol Spray Can (340g)

Description:
Toolmaker's Ink enables you to perform accurate scribing without glare. It is a fast drying film that won't peel, flake or rub off.

Benefits:
Will provide excellent adhesion to metal, glass, or plastic. You can scribe the surface using a shop tool within 5 minutes of application. Toolmaker's Ink is easily removed with 6095 Toolmaker's Ink Remover.

Application:
Use for production layouts, pattern making, tool, die, and model making. May be used for templates and machined parts.

Directions:
For maximum adhesion, the surface must be clean, dry and free of grease, rust, scale or any other loose particles. This product should be used at temperatures between 55° and 80°F (13° and 27°C) for best results. Align the spray head with black dot on valve rim. Shake can well for at least 1 minute after agitator ball begins to rattle. Shake intermittently during use. Hold the can 10 to 12 inches from surface and press spray head firmly. Spray from side to side for even coverage. Clear spray head after each use by turning can upside down and spraying for 2 to 3 seconds.