*Specification:
*The Foscam FI9803P Wireless IP Camera is the expansion of the Foscam outdoor camera range, alongside the FI9805W with 1.0 Megapixels resolution.
*The Foscam FI9803P Outdoor Megapixel Wireless IP Camera adopts a 720p HD video quality (1280 x 720) as well as a high performance media processor, and high speed video protocol processor.
*As a result, it is capable of H.264 video compression allowing for extremely smooth video transmission with minimal bandwidth consumption.
*In addition, due to the small file sizes produced by H.264 video compression it has the ability to save tremendous hard drive space when doing manual video recording.
*In brief, the Foscam FI9803P comprises 720p HD video quality, H.264 video compression, wireless N suitability, the ability to remotely view over the Internet, motion detection and night vision images.
*In addition, you can use your smartphone (iPhone, Android)) or your default browser (Internet Explorer, Chrome, Firefox, Safari) to view the images through an Internet connection.
*The camera can be used as part of your alarm system at home, office, ... with the ability to monitor over the internet. Box Contains Foscam FI9803P IP Camera; Power Supply; Quick Installation Guide; WiFi Antenna; Mounting Bracket; Ethernet Cable; CD



Image Sensor

Image                               SensorHigh Definition Color CMOS Sensor
Display Resolution              1920 x 1080 Pixels(3 Mega Pixels)

Len
sf:                                    4mm , F:2.4 (IR Lens)
Min. Illumination                0 Lux (With IR Illuminator)
LensLens Type                   Glass Lens
Viewing Angle                    70 Degrees

Audio
Input                               N/A
Audio Compression            PCM/G.726

Video
Image Compression           H.264
Frame Rate                       25fps(VGA), 30fps (QVGA)
Resolution                        640 x 480(VGA), 320 x 240(QVGA)
Flip Mirror Images             Vertical / Horizontal
Light Frequency                50Hz, 60Hz or Outdoor
Video Parameters              Hue, Brightness, Contrast, Saturation, Sharpness

Communication
Ethernet                          One 10/100 MBPS RJ - 45
Supported Protocols          HTTP, HTTPs, FTP, TCP/IP, UDP, SMTP, DHCP, DDNS, UPnP, RTSP
Wireless Standards           IEEE 802.11 b/g/n
Data Rate                        IEEE802.11b: 11Mbps(Max.); IEEE802.11g: 54Mbps(Max.); IEEE802.11n: 150Mbps(Max.)
Wireless Security             WEP&WPA/WPA2 Encryption

Physical
Infrared Light                  36pcs IR-LEDs, night vision range up to 30 metres
Dimensions                     140(L) x75(W) x80mm(H) 205(L)x87.6(W)x82.5mm(H)
Gross Weight                  1.4138kg (Color Box Size:228x128x108mm)
Net Weight                     1.6kg ( accessories included)

Power
Power Supply                  DC 12V/2.0A (EU,US,AU adapter or other types optional)
Power Consumption         6.9 Watts (Max.)

Environment
Operating Temperatures    -20° ~ 55°C (-4°F ~ 131°F)
Operating Humidity          10% ~ 80% non-condensing
Storage Temperatures       -20°C ~ 60° (-4°F ~ 140°F)
Storage Humidity             0% ~ 90% non-condensing

PC Requirements
CPU                               2.0GHz or above (suggested 3.0GHz)
Memory                          256MB or above (suggested 1.0GB)
Display Card                   64MB or above
Supported OS                 Microsoft Windows 2000/XP/Vista Mac OS
Browser                          IE 6.0, IE7.0, Firefox, Chrome, Safari or other standard browsers

Certification
Certification                    CE, FCC, RoHSWarranty

Warranty Limited 2-year warranty

Q1) What equipment do I need to setup Foscam IP cameras?
A) Just a wireless router with broadband speed of at least 10Mbps and a PC for initial setup. 

Q2) Do I need to on my home PC 24hours to view or record anytime?
A) Just the router needs to be on 24 hrs, but not the home pc.

Q3) Does it record to a SD card?
A) Recording can only be stored on SD card (max 32 GB) all indoor models except FI89XX series.

Q4) Does the camera auto record on motion-detection?
A) Yes. For all models, you can select either continuous or motion-detection recording.

Q5) Does the camera always need to be attached to the router or only for initial setup?
A) The camera only need to be attached to a router at the initial setup. Once you get it up wirelessly, you can shift to anywhere with power socket in your house and the wifi signal is strong enough.

Q6) Does the camera need a power socket or is it battery operated?
A) Yes, the camera needs a power socket. Cannot be operated by battery.

Q7) How long is the cable?
A) Cable length around 1.5 meter. We do sell the extension cables of 3m at $25 each.

Q8) How easy is the configuration of the cameras to the modem/router?
A) Most Plug and Play models can be setup within 5 minutes. For models without the play and plug function, eg FI8909W it will require an additional portforwarding step for remote viewing, complexity depends on the router used.

Q9) Can we remote control the camera to different angles?
A) Yes, remote control of the pan/tilt cam, horizontally 300 degrees, vertically 120 degrees can be done thru any internet PC or 3G phone even when you are in the office or overseas.

Q10) Is it viewable via iphone or Android phones? How is the quality?
A) Yes. Free apps are available for both. "Foscam" or "Foscam Viewer". Sample pic viewed on iPhone as shown:

Q11) What is the difference in viewing angles between the wide angle fixed 100 deg models (eg C1) and pan/tilt 70 deg (rotatable to 300 deg) models (eg FI9821P)?

As seen from the following pics, C1 allows a wider angle to be seen (include partial of the room entrance) but FI9821P has a slightly narrower view (however, it's able to rotate to a wider 300 deg view).

A) Sample pic taken with C1:

Sample pic taken with FI9821P:

 

Q12) Is there audio feature as well?
A) There is 2 way audio function and the mic and speaker can be switched on and off from your IE browser.

Q13) Will multiple users be able to access from different locations and devices to monitor?
A) Yes. Up to 4 users can login concurrently.

Q14) Does it support multiple camera viewing?
A) Yes, it does support multiple cam viewing of up to 9 cameras (IE browser only).

Q15) How secure is the camera, will there be interference similar to cordless phone?
A) Foscam IP cameras supports comprehensive Wi-Fi encryption through Wi-Fi Protected Access (WPA2), the latest wireless security algorithm developed specifically for wireless networks. Support of WPA2 encryption indicates the camera complies with all protocols mandated by the system to ensure Wi-Fi signals are secure and to prevent eavesdropping or interception of video and picture transmissions.

Q16) Is there a demo site to view the quality of the video before I place my order?
Sample images of our 0.3 mpix (FI8910W) and 1.0 mpix (FI9816P) as follow:

FI8910W (0.3 mpix)

FI9816P (1.0mpix)

Q18) Can the cameras be mounted to the wall or ceiling?

A) Yes, all Foscam IP cameras come with mounting bracket. Sample image of the camera when mounted to the wall as shown below:

Q18) How soon can I receive the camera after I place my order through your online form? 

A) You should be able to receive it by the next day. For delivery on weekends, orders must be submitted by Fri 5pm. Alternatively, you can get the products from our partner's retail outlets (refer to "where to buy" page).

Q19) Do you provide onsite configuration service?
A) Yes, we have freelance Engineers who can go over to your home/office for the configuration on PC and mobile phone. The charges is $100 per trip for up to 3 cameras (additional sets at $20 each). Service warranty for onsite service is within 30days. After 30days, follow-up onsite service will be chargeable ($80) and equipments will be repaired with no charges involved (if within 2 yrs warranty).

If mounting is required, our outsourced contractor charges additional $100 (for 1 set only) or $80 per camera (for 2 sets and above). Extension cable (3m) if required for powerpoint more than 1.5m from the place you want to mount is $25 each.