Flash & Go LUxX 50,000 Flashes +Precision cartridge

Included in the box
Flash & Go LUXX with 1 attached cartridge with 50,000 light pulses
1 precision cartridge with 5000 light pulses
User manual
DVD
1 x Multi voltage charger (UK,EU, USA or Aussie Adaper will be provided according to the country)
110-240V Can be used worlwide
Flash & Go LUxX is intended for removal of unwanted hair. Flash & Go LUX is also intended to effect long term, or permanent hair reduction. Permanent hair reduction is defined as a long-term stable reduction in the number of hairs re-growing after a treatment regime.
Flash & Go LUX
Flash & Go LUxX is FDA cleared in the USA and was tested by top dermatologists and plastic surgeons who concluded that Flash & Go LUxX can be used safely, easily and effectively in a typical home environment.
Clinically Proven
The Home Pulsed Light technology has been designed to capture all the clinical benefits of pulsed light for hair removal at home. In clinical trials lasting over one year, top dermatologists and plastic surgeons found Flash & Go LUxX able to achieve excellent hair removal results.
Safe
To further increase the safety levels, the newest line, Flash & Go LUxX, introduces a smart Skin Sensor which detects if your skin complexion is safe for treatment. Only when your skin tone is within the allowable range will treatment begin with a flash of light.
Fast Treatment
With the treatment area and fast repetitions rate, Flash & Go LUxX provides a fast, yet effective, hair removal treatment at home. An entire male chest or female legs can be treated in 30-40 minutes.
Safety with Flash & Go LUxX
With Flash &Go™ Safety Comes First. HPL™ technology in Flash&Go LUxX - Superior safety with llower energy level. Home Pulsed Light™ technology is able to achieve long-term hair removal results at a fraction of the energy level used in other light-based hair removal equipment. The low energy used in Flash & Go LUxX reduces its potential to cause harm or complications, and contributes to your overall safety.
Best Results
Plan your Flash &Go LUxX treatment for best results.The efficiency and results vary from person to person according to the frequency of use and skin type. Some may see results sooner than others.
Privacy of your own home
You can get good resut from the use of Flash &Go LUxX in the comfort and privacy of your won home and at any time you like.
How does it work?

The process of laser and light-based hair removal is well known and established. It has been proven in clinical use around the world for over 15 years as a safe and effective way to achieve long-term hair removal.

Step 1.
Before HPL Treatment: Healthy hair follicles with normal hair growth
Step 2.
During HPL Pulse for hair removal: Light energy combined with the acoustic effect is selectively absorbed in the hair shaft and disables hair growth.
Step 3.
Immediately After HPL Pulse: Energy is absorbed by the hair follicles while the surrounding tissue remains at normal temperature and hair removal is achieved.
Light based hair removal, HPL Technology
Light-based hair removal technology is based on the theory of selective phototermolysis. In this process, optical energy is used to disable hair growth. In order to achieve this thermal effect, the hair shaft needs to selectively absorb light energy and transform it into heat. This selectivity is achieved since high optical energy delivered to the tissue is mostly absorbed by hair shaft pigment, while the epidermis and the surrounding tissue is actively cooled (by a cooling mechanism). The pigment in the hair shaft that is responsible for the absorption of the light is called melanin and it generates the heat that eventually disables hair growth. When hair growth is disabled, long-term hair removal is achieved.
SilknFlash& GoLuxXXLisequipped with an automaticdetector ofskin color.

Awaxing session with Flash& GoLuxXXL125 000flashesis performedin less than1 hourfrom the 3rdmeeting,the hairis reduced by 50% (clinically tested). Flash& GoLuxXXL125 000flashes,anepilatorpainless andeasy to use.
Power: 4joules/cm2
2 year warranty
Technical
Flash& GoLuxXXL50000flashes
Surfacetreatment4 cm⊃2;for the body
Surfacetreatment2.5cm⊃2;for the face
Safetytriggerflash
Mains supplycontinuous
1flash every3.5 seconds
Detectorskin color
Degree ofskin1-5
Intensity4joulesper cm2
IPLHair Removal

HPLtechnology: The technology ofpulsed lighthair removalisbased on the theoryof selective photothermolysis. In this method, theopticalenergy is used toblock the growthof the hair.Forthisthermal effect, the hair shaftneeds toselectivelyabsorb light energyand transform it intoheat.This selectivity isdue to the factthatthehigh opticalpowerapplied to thetissueisprimarilyabsorbed by thepigmentofthe hair shaftwhilethe skinand surrounding tissuearecooledactively(by a cooling mechanism). Thepigmentinthe hair shaftwhichisresponsible for absorptionof lightis calledmelaninandgeneratesheatwhich ultimatelyinhibits the growthof the hair.
SilknFlash& Go, Recommended by doctors
Flash& GoLuxXXL125 000flasheswas approved bythe FDA in theUnited Statesand has been testedbydermatologists and plastic surgeonshigh-levelwho concluded that Flash& GoLuxXXL125 000 flashescould be usedsecurelyandeffectively home.
FREQUENTLY ASKED QUESTIONS

1. Does Flash & Go work?
Yes. In clinical trials held by physicians, Flash & Go was proven to safely achieve excellent hair removal results. Flash & Go has the FDA clearance for the removal of unwanted hair. In addition, Flash & Go is not required by FDA clearance to be used with other products.

2. Where on my body can I use Flash & Go?
The Flash & Go device has been designed for body treatments with the most common areas being the legs, underarms, arms and bikini line. Flash & Go can be used for the treatment of facial hair from the cheek line downwards. Extra caution should be used when treating areas on the face to avoid the eyes and avoid pulsing on red/pink lip line. And as with other parts of the body, care should be taken to avoid sun exposure before and after treatments with Flash & Go. Acceptable means of sun protection are covering garments or sunscreen (SPF higher than 50) used continuously for 3 weeks before and after treatment.

3. Why does the website say I can use Flash & Go on my face below the cheek bone however my brochure it says it is not recommended for use on the face?
After two years of studying market data we have determined that Flash & Go can be used safely on facial areas below the cheek bone. We are currently in the process of reprinting brochures to reflect this change. We apologize if you received a brochure that has not yet been updated, however we hope to inform you of our latest realtime information online.

4. What is the Skin Color Sensor and other safety features?
Flash & Go comes with a built-in SKIN COLOR SENSOR that is designed to measure the skin tone of the applied surface and enable application only on suitable skin tones. This unique safety feature will not enable treatment if your skin is too dark or too tanned taking the guesswork out of treatment.

Flash & Go has been designed with your safety in mind, and tested and approved by top dermatologists and plastic surgeons to meet their safety standards for a home-use device. But like any skin product or electronic device, one must use according to the operating instructions and user precautions.

The applicator tip of Flash & Go has been designed so that a light pulse can only be emitted when the applicator is in contact with the skin. This eliminates the possibility of an accidental flash of light directly towards the user's eyes.

5. How can I maximize my treatment results?
-Start with clean, shaven skin - NO WAXING.
-Progress quickly to higher energy levels - once you have tested all treatment areas on the low energy setting we recommend you move up to higher levels.
-Schedule your treatments in two week intervals. Typically you will see results after the 3rd or 4th treatment - after this you can start treating monthly.

6. Will Flash & Go hurt?
When used properly most users of Flash & Go & Go report feeling a slight sensation of heat when the pulse of light is emitted. Users with thicker and darker hair may feel slightly more discomfort, but this discomfort subsides once a treatment is completed, and decreases with each treatment as fewer hair follicles are in the treatment area. For your convenience Flash & Go & Go has five setting levels that can be used according to your sensitivity and desired result.

7. How often should I use Flash & Go?
Treatment sessions with Flash & Go should be spaced every two weeks for the first three to four sessions. After that treatments should be done if hairs have grown back, until the desired results are achieved. The total number of sessions varies from person to person, but, in general, most individuals notice a reduction after four treatments, with very good results after six treatments. Most females require eight full sessions. Males tend to have more stubborn and deeper hair and may require ten-twelve treatments.

8. Is Flash & Go effective on white, grey or blonde hairs?
Flash & Go treatments work best on darker hair types, or hair that contains more melanin. Melanin is the pigment that gives hair and skin its color, and will absorb light energy. Black and dark brown respond the best, although brown and light brown hairs will also respond but typically require more treatments. Red may show some response. White, grey or blonde hairs usually don't respond as well to treatments though some users have noted results after multiple treatments. For more information on why certain hair types respond better than other please refer to the Flash & Go & Go instruction manual.

9. Can I use Flash & Go on brown or black skin?
Do not use Flash & Go on naturally dark skin complexion. Flash & Go removes unwanted hair by selectively addressing hair pigment. Varied quantities of pigment also exist in the surrounding tissue of skin. The quantity of pigment in a particular person's skin, which is manifested by their skin complexion, determines the degree of risk they are exposed to using Flash & Go. Treating dark skin can result in adverse effects such as burns, blisters, and skin color changes (hyper- or hypo-pigmentation). Many other laser and light devices, professionally and at home, also have the same restrictions on naturally dark skin complexion.

Flash & Go comes with a built-in Skin Color Sensor that is designed to measure the skin tone of the applied surface and enable application only on suitable skin tones. This unique safety feature will not enable treatment if your skin is too dark or too tanned.

10. When will I see results from Flash & Go?
As with any light-based or laser hair removal device, results are not immediate, and in fact you may not think anything happened all. Most users see noticeable reduction after 4 treatments. Each time you treat, you should increase the energy level. It is important to be patient and consistent during your hair removal process as hair may sometimes appear to be growing back after a treatment, but typically after two weeks many of these hairs will simply fall out.
It is important to understand the hair growth cycle. Hair grows in three different stages and only hairs in an active growth stage will be affected by a Flash & Go treatment. This is one of the main reasons that multiple treatments are required to achieve the desired result.

11. Are there side effects from using Flash & Go?
Side effects and complications, while possible, are not common if Flash & Go is used according to the instructions and precautions included with the device. Please read these instructions before beginning treatment. In clinical studies a small fraction of users reported some sensation of heat, redness around the hair shaft, and slight swelling. These conditions usually subsided within an hour after treatment. For more information on side-effects and how to avoid them please read the Flash & Go instruction manual.

12. Can a man use Flash & Go?
Yes, Flash & Go may be used by men, although hairs on men, especially those on the chest, will require more treatments than those of women to get the desired results.

13. Why is my hair growing, even though I treated it a week ago?
It is quite common for hair to appear as if it is still growing up to two weeks after a treatment with Flash & Go. This process is known as \