Description:

3D designed cylindrical Rosebud Silicone Baking Mold，perfect and exquisite detailed design.

You will making an vivid rosebud with this mold，ideal for making fondant，chocolate，candy，etc.

If the mold is to deep and difficult to take the bear out， you could cut the mold vertically (do not cut to bottom).

and tighten it with rubber bands or plastic wrap showed as the picture，then pour into liquid.



Features!#!amp!*!amp;details:

Material: Silicone

Color: Randomly Shipping

Dimension: Appr. 5.8*5.8*5.7cm

Weight: 132g



Package Included:

1 X 3D Rosebud Silicone Baking Mold




Cleaning and Maintenance:

1. Before first use， clean with clear water or detergent， to remove surface dust.

Before baking， can brush a little butter on theinside mold .

Using conjoined mold， pour some water into empty slots，air burning is prohibited



2. After each use， can be soaked in diluted detergent 10 to 30 minutes.

Please clean with soft cloth，do not use coarse clean ball to avoid the scratch damage to the mold.

Please dry after cleaning， place in the srorage box， silicone is easy with electrostatic reaction， adsorbing small particles in the air and dust.



3. When used in the oven， must be placed in the middle of the oven ，keep 10 cm distance from heating pipe ，

and 5 cm from the oven walls so as to avoid high temperature damaging the mould.



4. Some of the mould have been cut open before out form factory， for convenient demoulding for buyers.

When use， tighten it with rubber bands or plastic wrap showed as the picture，then pour into liquid.




How to use a cylindrical mould:

For better out of the mould， you may use a knife to cut the mould (don't cut to the bottom)