Specification:
<br />
<br />A.Open or close the bluetooth bulb
<br />1.Open the bluetooth bulb
<br />A.the bluetooth bulb that I pick up on the lamp holder,through the power switch 
<br />can turn on bluetooth blub power;After operating the bluetooth bulb you can see 
<br />white LED lighting light up,and then have a bluetooth boot prompt music ring.
<br />B.an on/off switch on the power switch action bluetooth bulb can is white leds and 
<br />color LED to switch between the two cycles.First open the power switch is white 
<br />LED lights,if you need to switch to the color of LED,please shut off the power,turn 
<br />it on again in 3 seconds will switch to the colored LED lights work 
<br />mode.Bluetooth ball bubble after turning on the power supply of any model can 
<br />use the remote to control all kinds of LED working condition.
<br />
<br />2.Close the bluetooth bulb
<br />A.in the boot state,through the power switch can instantly close bulb total power.
<br />B.the bluetooth bulb,turning on the power supply can be opened or closed by 
<br />remote control LED lights,but this time the bluetooth function is not closed.
<br />
<br />B.Mobile phone pairing and connecting the bluetooth bulb
<br />1.Open the bluetooth bulb,bulb into pairing mode automatically.
<br />2.Start the buletooth phone and serch the bluetooth bulb.
<br />3.from mobile phones to find the equipment list,select the device name is 
<br />Speaker light,heard a matching complete after prompt,says it has complete the 
<br />connection of mobile phones and bluetooth bulb Before.
<br />4.IF the phone has beeb pairing anf bluetooth bulb,directly open the mobile 
<br />phone bluetooth and bluetooth bulb,they can automatically connected connected 
<br />after the power,don't need a mobile phone to serch for equipment.
<br />5.If have mobile phones and bluetooth bulb is connected,if you need the 
<br />bluetooth bulb and another one to connect,put the bluetooth phone before closing 
<br />for the ball bubble and other bluetooth phone matching connection.
<br />6.Have bluetooth computer and bluetooth bulb is also used for matching,please 
<br />refer to the specific pairing method computer bluetooth pairing method of 
<br />bluetooths software.
<br />
<br />C.Disconnect the bluetooth bulb
<br />1.The need to disconnect the bluetooth bulb,please use the phone's bluetooth 
<br />menu to remove the device from the pairing list or disable bluetooth phones.
<br />2.By turning off the power of the bluetooth bulb can disconnect bluetooth bulb 
<br />connected to the phone.
<br />
<br />D.Infrared remote control function
<br />Througth the infrared remote control the color of the corresponding function keys 
<br />can be carried out on the bluetooth bulb inder control:
<br />1.Bluetooth ball bubble of a different color of choice.
<br />2.All kinds of automatic conversion mode switch.
<br />3.The white LED light and color LED lamp brightness adjustment.
<br />4.LED lights turn on and off.
<br />
<br />
<br />Features:
<br />-Can be controlled via smart phone or tablet / Bluetooth
<br />-LED lamp appearance
<br />-Wireless Bluetooth connection
<br />-E27 lamp base, screw in type
<br />-Adjustable volume of light and music
<br />-Bright light, comparable to a 50 Watts halogen bulb
<br />
<br />Specifications:
<br />Shell Color: White
<br />Interface: E27
<br />Working Voltage: AC100V~240V / 50-60Hz
<br />Power: 12W
<br />LED power: 6W
<br />Speaker power: 3W
<br />Frequency response: 135Hz to 15KHz
<br />Wireless version: 3.0
<br />Support configuration: A2DP
<br />Radio range: 10m(33ft)
<br />The light color: RGB 16 color with the remote control
<br />Amplifier: Class D
<br />Signal Input: Bluetooth. (2. 4G Bluetooth Transmission)
<br />Bluetooth Transmission Distance: 5-10 meters
<br />Bluetooth Connection Password: no
<br />Working Temperature: -40~ 80 degree
<br />
<br />
<br />Package Include:
<br />1 x LED lamp (with Bluetooth speaker)
<br />1 x Remote controller (Includes CR2025 battery)
<br />1 x specification