Description:

• Safety insulator tap
• Easy crimping with normal tool
• Quick installation without striping wire job
• For 22-10 AWG 
• 
  
• These are a quick and reliable way of connecting cable & wire.Slide the connector over the existing cable add the new wire and squeeze with a pair of pliers then click the flap shut.

Colors: Red Blue Yellow

RED
Maximum current:10A
Suit Cable Size:22-18AWG/0.5-1.0mm2

BLUE
Maximum current:15A
Suit Cable Size:18-14AWG/1.5-2.5mm2

YELLOW
Maximum current:24A
Suit Cable Size:12-10AWG/4.0-6.0mm2

Package included:
60pcs Scotch Lock Quick Splice

Red 20pcs

Blue 20pcs

Yellow 20pcs

Description of 22 -10Gauge Quick Splice  wire Connectors Qty. 60/lot

60 Count package of red mid-line quick splice connectors for22-10  awg wire. Quick splices are a fast and easy way to splice into an existing wire. No stripping of the wires is necessary. Simply insert both wires into the splice， fold the top with the metal insert over the wires and squeeze down with pliers until the cap clicks into place. The metal insert in the connector is designed to cut through the insulation and make the connection between the two wires.

Splice connectors are plastic clips used to make quick splices or connections with two or more pieces of wire. They are designed for use with electrical cables， telephone cables and electrical device wires. A splice connector consists of a plastic clip with a sharp metal insert that safely cuts through the plastic insulating jackets of two wires and crimps them together. The splice connector clip snaps into place to securely hold the wires together. You can use a splice connector to splice wires without having to solder them .