Instructions for Installing the Replacement Touch Screen of iPhone:
Things You▽ll Need:SIM removal tool, Phillips screwdriver, Pry stick,iPhone 4/4S touch screen digitizer

1. Turn off your iPhone, insert one end of the SIM removal tool into the small hole at the right side of the iPhone. Push the end of the removal tool into the hole until the SIM tray pops out a little from the lid. Pull the SIM tray out and set it aside.

2. Then use the Phillips screwdriver to remove the two screws surrounding the dock connector on the bottom of the iPhone. Flip the device over so it is face down on your work surface.

3. It is easy enough to push away the back cover after remove the screws.Pleasepush away the back coverupward.Then,we will remove the battery.

4. Next, we will remove the EMI electromagnetic shielding case.There are densecomponents after removing the 4 fixed screws.

5. We would still remove the other EMI electromagnetic shielding case located in the middle of phone and the inner flex cable. All of these need to pry up carefully with the special designed tool. Please pry up the flex cable in the iPhone 4.

6. There is a small part fixed with screws on the upper right corner，it’s vibration motor of iPhone.

7. We should remove screws and cables before dismounting the main board, and take down other iPhone▽s parts, such as camera, loudspeaker and so on. Pry up the connective parts on the iPhone 4 and take down the camera.

8. Remove the larger module on the bottom and it▽s a loudspeaker module.

9. Then take down the main board of iPhone 4.

10. This is a second microphone and VGA camera.

11. Then we could pry up the front panel.

12. Due to the complexity of iPhone structures, the screen of iPhone 4 compact with its panel,it is hard to seperate them, suggest you that seek the professional for dismantling your phone, otherwise it may be easy broken.

DescriptionHave you spent a long time to searching a Touch screen for your Apple products? Here comes the good news. As the emergence of this product, your search ends here. Adopt latest technology; it can be your best choice for replacement. With its high quality and practical applicability, it is worth buying absolutely. Addition, every Touch screen we sold is tested strictly before shipping, so the quality can be guaranteed. What´s more, you won´t worry about how to install it for you can get a pry tool for free and if there is any question, you can contact our service department. Thank you for your attention and placing an order!

FEATURES

High quality digitizer Screen for iPhone 4S
It is used to repair replace your wrong, damaged, cracked, faulty touch screen
Each screen is tested before shipping and 100% working
It is fits for all the models listed below, ideal for DIY parts in repairs
If there is any question, please feel free to contact our service department.Our pleasure to serve you

Specifications

Color	Black
Compatible With	iPhone 4S
Dimensions	11.3 x 5.6 x 0.1 cm / 4.45" x 2.2" x 0.04" (L x W x H )
Weight	0.74oz / 21g

Package Includes

1 x Touch Screen Digitizer Replacement for iPhone 4S Black

Extra Info

Note

Please make sure that the product is installed by professional, otherwise, you may damage the touch digitizer,LCD display screen and flex cable when disassembling or installing the product.Due to the complexity of iPhone iPad iPod structures, suggest you to seek the professional for dismantling and installing your phone, otherwise may be easy broken it.We´ll not bear the loss of incorrect installation and purchase ,thanks for your understanding.