NEW 2000W Pure Sine Wave Inverter Power Board Post Sine Wave Amplifier Board DIY kit

Notice: This is a DIY Kit ， need to weld the component by yourself

Descriptions:

1.You can change the modified sine wave inverter to sine wave inverter， output power 2000W. Simple， to the modified sine wave inverter stage removed，

2.Then add more laps transformer subprime， the modified sine wave inverter voltage capacitors for-220UF / 450V， then test the high voltage capacitor voltage DC380V

3.To use 2 pieces of 0.4 copper wire around four laps in the transformer， the voltage is about AC16 on it， and then offer these voltage to sine wave inverter class board，

4.after class board output AC 220v/50HZ ， output waveform: pure sine wave.

Technical parameters:

Input voltage: DC380V.

Input voltage: AC16V.

Output voltage: AC220V

Output frequency: 50 / 60HZ (adjustable)

Output waveform: pure positive wave.

PCB size: 165 * 100 * 50MM.

Contains :a pure sine wave inverter Driver Board "EG8010 + IR2110"

Note:2000W use power tube include 4pcs 47N60

Package Included:

1x 2000W Pure Sine Wave Inverter Power Board Post Amplifier Board DIY KIT

Unit Type:: piece

Package Weight:: 0.200kg (0.44lb.)

Package Size:: 15cm x 10cm x 10cm (5.91in x 3.94in x 3.94in)