Item Descriptions:

Elise (ELLISSE) forged quenched Peg Hammer St. Martelo MADE IN JAPAN

It is a Peg Hammer that can securely fix the peg used for tents and tarps to the ground.

A forged hammer that heats a round steel material to about 1100 ° C in a red light and crushes the material at a stretch with a strong force of about 1 ton.

By applying strong pressure to heated steel, a peg hammer with excellent strength is completed.

Because quenching is applied to the entire Peg Hammer, a hard and tough bending hardy has been completed.

St. Martelo ... In Portuguese it means "holy hammer".

【Product Details】

Product size: about 303 × 102 × 35 mm

Hammer material: S55C (forged hardened cation electric tea paint, chrome plating)

Head material: brass, stainless steel (SUS 304)

Pattern material: Oak

Body weight: Approximately 550 g

※ Product specifications · design etc are subject to change without prior notice.

In case

※ Please be advised that the color of the product may look different depending on the customer's PC environment etc.

Peg hanger designed on the concept of "easily pulled out easily with ease" when pulling a peg.

Just by pointing down the peg hammer, it is possible to pull out the peg.

Because the whole Peg Hammer is hardened, it is a hard body that is hard and difficult to bend.

Even if you pull it through a peg hole, the peg hammer nail does not bite.

The tree pattern is an oak tree (Kakinoki).

I used a flowing curve for the handle of Pegghamer.

Over time,

It will change to a tasty color.

There is no thing that it disappears even if many years pass by laser burning.

Features:

• It is a Peg Hammer that can securely fix the peg used for tents and tarps to the ground.
• A forged hammer that heats a round steel material to about 1100 ° C in a red light and crushes the material at a stretch with a strong force of about 1 ton.
• By applying strong pressure to heated steel, a peg hammer with excellent strength is completed.
• Because quenching is applied to the entire Peg Hammer, a hard and tough bending hardy has been completed.
• Coating of the hammer body is chrome plating with excellent rust prevention performance, shiny and less corrosive in the atmosphere.
• The head is made of brass and is an alloy of copper Cu and zinc Zn, also called "brass".
• It has moderate strength, it gradually darkens over time, sometimes pleases the change.
• Since this darkening is an oxide film, it can also expect rust prevention effect.
• The tree pattern uses oak tree (Kakinoki), a flowing curve is used for wooden pattern.
• We manufacture in Niigata prefecture, Tsubame Sanjo, which is excellent in metal processing.

Product information:

Shipping Weight: 594 g

Package Dimensions: 3.71 x 12.70 x 31.19 cm