Item Descriptions:

Color:

Space Gray & Burgundy Red Metallic

With alcohol cleaner

Please wipe off the dirt and oil of the home button with the included alcohol cleaner cloth.

The alcohol content of the cleaner is 70%.

Please paste the ring after completely wiping it with a volatile or dry cloth etc.

Layered Home Button Ring On the back is an elastic 3M double-sided tape.

When the side is sticky

With seal backing attached

You can wipe it with an alcohol cleaning cloth to eliminate it.

After drying, peel off the mount and paste the ring on the home button and it's done.

Compatibility with Touch ID

Touch ID adopts electrostatic capacitance method, and it is weak with the iPhone and the reading precision is lowered if it is not energized.

Seal type

Although the sensitivity of Touch ID is good with standalone use of this, it is because part of body such as iPhone and hand is in contact with parts other than button.

If this is used with a glass film plus a case, using the button seal will eliminate the part which touches the iPhone directly, depending on the shape of the case the ground will be insufficient and the authentication sensitivity will drop.

Many users who use glass films are expected to be used in combination with cases, so users who experience reduced sensitivity will occur for a while.

Truffle layered ring

There is nothing in the ring so even if you use it with a case or glass

Sensitivity degradation due to the ground shortage is zero

is.

Protecting the home button

Protect button with ring as bumper

Left truffle layered ring right home button seal

Traffle layered ring protects the home button with the bulged ring part becoming a bumper.

Then what if you receive a pinpoint impact in the ring?

The home button of the iPhone is made of sapphire glass with hard Mohs hardness 9 next to diamond.

this

There is no seal that protects the shock at the level where the sapphire glass button is scratched

In the truffle, we adopted the ring shape which reached the conclusion that sealing has no merit besides decoration, such as putting a handle on the button.

Sticky after peeling

Truffle layered rings are fixed to the home button with double sided tape.

Although it does not adhere to the whole surface of the button like the seal type, 3M made double-sided tape is adopted and it is fixed with the necessary sufficient adhesive strength.

Even when peeled off due to circumstances most of the adhesive will not remain on the home button.

Even if you reattach it (for positioning) when attaching it, the adhesive strength will not decrease.

Features:

• Please enter model number Confirm this is compatible:
• The touch sensitivity of the iPhone 7/7 Plus also has zero sensitivity reduction!
• With nonflammable alcohol cleaner to remove dirt of the home button before sticking or when the ring is sticky.
• Sensitivity reduction is zero even for the second generation TouchID which became more delicate in the 6s model.
• Aluminum layered ring that reduces steps of tempered glass film and home button of 0.2-0.4 mm thick.
• Especially designed to best match 0.33 mm thick glass.
• The raised ring becomes a bumper and protects the home button from impact.
• There is no seal inside the ring.
• The transparent feel of the sapphire glass button is intact.
• Touch ID fingerprint authentication sensitivity decrease is zero even with glass film and case combination.
• Fixed with the attached double-sided tape.
• Burgundy metallic rings are included besides space gray.

Product information:

Shipping Weight: 40 g

Package Dimensions: 0.41 x 7.11 x 7.49 cm