KW812
Specifications:
100% brand new and high quality
Works with Volkswagen and Audi(Audi/Seat/Skoda/Jetta/Golf/Beetle/Touareg/GTI/ Passat and more) sold worldwide since 1990
Compatible with the latest cars that require a direct CAN connection
Reads and erases Diagnostic Trouble Codes (DTCs) of engine, ABS, airbags and automatic transmission
Turns off MIL lights of engine, airbag, ABS and A/T
Simply plug this reader into the 16-pin diagnostic socket on your car, switch the car to pre-ignition, and the fault codes will be displayed on the reader's built-in screen.
Features:
Reads Diagnostic Trouble Codes (DTCs) from Engine
Reads Diagnostic Trouble Codes from Automatic Transmission (AT)
Reads Diagnostic Trouble Codes from Anti-lock Braking System (ABS)
Reads Diagnostic Trouble Codes from Air Bag System (SRS)
Erase/Clear Trouble Codes and switch off warning lights
Display: Backlit LCD, 2-line, 8 characters
Operating Temperature: 0 to 50°C (-32 to 122 F°)
Storage Temperature: -20 to 70°C (-4 to 158 F°)
Power: 10.0 to 15.5 Volts provided via vehicle battery
No batteries needed-powered via OBD II cable
Small, light-weight, compact design
Easy to read backlit 2-line LCD display
Powered by diagnostic socket (no batteries required)
Even supports new CAN protocol cars (many models from 2003 on)
Note: Does not support 2008+ Seat Ibiza (6J Chassis)
Note: This tool only covers the systems listed - it cannot reset service lights
Package include:
1 x Code Scanner
KW805
Description:
The KONNWEI KW805 CAN OBD-II Code Reader provides auto enthusiasts and do-it-yourselfers with an easy, portable and economic way to check Diagnostic Trouble Codes (DTCs) and their definitions for OBD-II compliant vehicles. OBD-II is the second generation of on-board diagnostics and has been a mandatory requirement for all vehicles sold in the US since 1996, both domestic and imports. The KONNWEI KW805 supports all current OBD-II protocols communications between your car’s computer and systems--including the newly released Controller Area Network (CAN) protocol. The DTC table contains most DTC definitions allows you to troubleshoot a wide variety of generic, manufacturer-specific and pending trouble codes, and drawing power from your car's own electrical system the unit does not require batteries or an AC adapter. Simply plug it in via its standard 16-pin OBD-II connector at the first sign of trouble and start diagnosing.
Features:
Works with most and later OBD-II compliant US (from 1996), European (from 2004, trucks and vans from 2007) and Asian vehicles
Reads and clears generic and manufacturer specific Diagnostic Trouble Codes (DTCs) and turns off check engine light (MIL)
Supports multiple trouble code requests: generic codes, pending codes and manufacturer specific codes
Supports CAN (Controller Area Network) and other current OBD-II protocols, including VPW, PWM, KWP2000, ISO 9141
Reviews the emission readiness status of OBD monitors
Determines the malfunction indicator lamp (MIL) status
Retrieves VIN (Vehicle Identification Number) on 2002 and newer vehicles that support Mode 9 (only those vehicles support mode 9 can be retrieved the VIN)
Utilizes standard 16-pin OBD-II connector meaning no additional connectors or cables are necessary
No batteries required: Unit is powered via OBD-II cable
Display: 1.5” Backlit LCD, 2-line, 8 digits
Dimensions: length 113 mm* width 74 mm*height 21mm
Weight: 0.35kg
Package:
1 x OBD scanner
1 x User’s manual
KW902
Net Weight: 0.01KG
Works with all OBD-II compliant vehicles
Wireless (Bluetooth)
Software included for Palm, PDA
Software included for Windows PC
Software included for Windows Smartphone
Supports ISO 9141, KWP2000
Supports SAE J1850
Supports CAN bus
Functions:
Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
Clear trouble codes and turn off the MIL ("Check Engine" light)
Display current sensor data, including:
Engine RPM
Calculated Load Value
Coolant Temperature
Fuel System Status
Vehicle Speed
Short Term Fuel Trim
Long Term Fuel Trim
Intake Manifold Pressure
Timing Advance
Intake Air Temperature
Air Flow Rate
Absolute Throttle Position
Oxygen sensor voltages/associated short term fuel trims
Fuel System status
Fuel Pressure
Many others...
KW901
Features:
- Condition:New
- Compatability:OBD2
- Country/Region of Manufacture: China
- Supply voltage(VDD):12V
- Work temperature range: -20 ~ +70degree
- Storage temperature range:-40 ~ +125degree
- RF sensitivity(Basic Rate): -85db
- Modulation Mode:GFSK
- Frequency Range:2402 ~ 2480MHZ
- Transmission Range:10M
- Bluetooth Profile:SPP
- UART Params:38400,8,n,1
- Small size, compact structure. Plug and never unplug
- Stable wireless connection
- No wires or batteries (adapter is powered by the diagnosis size sockets)
- Stop communication, wait half an hour, auto sleep
- Supports all OBDII protocols
- The adapter uses the fastest and most reliable ARM chips
With kw901 you will be able to perform a complete computer diagnostics car
and even to correct minor faults without resorting to service stations.
kw901 scantool is a high-quality automotive scanning tool, supports all OBD-II
The device is a small adapter that plugged into the vehicle OBD-connector.
On Bluetooth, it connects to any computer, tablet or smartphone, With associated diagnostic procedures . Doing these simple operations, you will be able:
- Measure the fuel consumption.
- Display real-time operating performance of the car, such as momentum,vehicle speed, oil pressure, coolant temperature, engine load, intake manifold pressure, throttle position, the values of oxygen sensors, air intake temperature, and more.
- Turn off the MIL (signal Check Engine).
- Download data to external media in a variety of formats for later printing.
- Record various parameters, display graphics in real time, and more.
