With this frame machine￡? you have no need to buy frame separator￡? vacuum screen separator￡? glue remover￡? frame laminator separately. It helps you to save time and money. It is easy and convenient to operate.<br><br><strong>Features:</strong><br>5 in 1 frame machine consists of heated plate￡? A-frame separator￡? manual vacuum separator￡? glue remover and frame pressing laminator.<br>Multiple functions combined in one￡? it can deal with many problems just with 1 machine￡? economical assistant tool for smart phone repair.<br>The application of advanced glue removing technology￡? this machine can remove glue effectively.<br>2 small pillars on the sides of operating plate￡? it can avoid the damage of steel wires when separating screen and it is helpful for operating safety.<br>Come with 5 phone moulds: upper mold for iPhone6￡? lower molds for iPhone4/5/6(4.7)/6(5.5).<br>Suitable for iPhone/Samsung phones repair.<br><br><strong>Middle frame separation steps:</strong><br>Turn on the thermostat switch of heated plate￡? then set the temperature to 80??C.<br>Use a sealed bag￡? make the adhesive gap around and back of the assembly coated with whellote gas￡? then seal the bag. Take out the assembly after 5min.<br>Heat it on the heated plate about 20s￡? turn on the corresponding mould switch￡? press the assembly on the suction mould. After being sucked￡? separating the middle frame slowly by hand.<br><br><strong>Screen separation steps:</strong><br>Turn on the thermostat switch of heated plate￡? then set the temperature to 80??C.<br>Haul back the lower plate￡? lock the screw tightly(prevent sliding). Put the silicone pad on the heated plate holes to holes￡? then place the screen on it.<br>Turn on the suction switch￡? the screen will be sucked tightly. When the screen reaches an appropriate temperature￡? start to separate the screen with a steel wire.<br><br><strong>Glue removing steps:</strong><br>Loose the three screws of the blade groove￡? put in the blade and screw it.<br>turn on the thermostat switch of glue remover on the right side￡? set the temperature to 180??C.<br>Put the silicone pad on the heated plate￡? when it reaches to required temperature￡? put into the screen with the flex cable inby.<br>Push into the screen￡? keep the height of the blade and the screen be the same￡? then move the screen to remove the glue.<br><br><strong>Frame press and laminating steps:</strong><br>Turn on the thermostat switch on the right mould￡? set the temperature to 180??C.<br>Choose a lower mould￡? put the lower mould into the plate(the groove of the mould keep downward)￡? push the lower mould to align with the upper mould￡? then fix the screws behind the lower mould.<br>After installing the frame of the screen￡? put it into the lower mould in the right direction. Put the lower mould on the plate in the right position￡? the upper mould press it for 6-10s￡? then take out the screen.<br>When laminating for iPhone6(4.7)￡? it need to install the upper mould.<br><br><strong>Note: </strong><br>Remove the blade when not removing glue to prevent from hurting by it.<br><br><strong>Specifications:</strong><br>Material: Coated Iron Plate + Aluminum Alloy<br>Plug Type: EU / US(optional)<br>Power Supply: AC100-240V<br>Power: 500W<br>Item Size: 25 * 32 * 41.5cm / 9.8 * 12.6 * 16.3in<br>Item Weight: 15kg / 33lb<br>Package Size: 39 * 38 * 46cm / 15.3 * 14.9 * 18.1in<br>Package Weight: 19kg / 41.9lb<br><br><strong>Package List:</strong><br>1 * Machine<br>1 * Power Line<br>1 * Silicone Pad<br>5 * Moulds<br>3 * Screw Drivers<br><div><span style="color: #666666; font-family: Verdana￡? Arial￡? Tahoma; font-size: 12px; line-height: 20px;">?</span></div>