Item Descriptions:
It is a heater with built-in automatic temperature controller.
The thermostat is not necessary.
How to use:
Install it in a position where water is fully immersed in the aquarium, and it will be completed if you energize.
please note:
※ If the ambient temperature becomes higher than the set temperature, the water temperature may become higher than the set temperature.
※ It is underwater only.
Since it may cause breakdown, bursting, bursting and fire due to residual heat outside the water, please remove to the outside of the aquarium after 20 minutes or more after turning off the power supply.
※ Please do not fill in the sand.
To maintain your aquatic life with constant temperature and stability, it is rust prevention, practical durability
specification:
Rated voltage: 110 VAC
Rated power consumption: 300 W
Temperature accuracy: ± 1 ° C
Temperature setting range: 20 - 34 ° C / 68 - 93 ° F
Safety device: built-in thermal fuse
Application: For indoor use, for fresh water, for seawater
Size (approx) Heater part size: 32CM, code size: 152.4CM
Care instructions:
Please clean this product once a month.
Be sure to remove the power plug before starting work.
Immediately after unplugging the power plug, the heater section is hot, so please remove it after cooling enough.
Dirt will adhere to the heater part such as calcium content in the water
.
Although it is not a defect of the heater, these will accumulate hard when left unattended and it will be difficult to remove, so please carefully clean with a sponge etc.
In that case please do not use a hard brush etc.
Depending on water quality, rubber deposits, kiss rubber will cause white deposits but there is no effect on the living body.
Do not use chemicals such as thinner or detergent.
In the summer, we recommend taking it out of the tank and keeping it after cleaning it.
In particular when using it in sea water please thoroughly wash the salt adhered.
Warm the thermostat body, the heater outlet, and the power plug clean with a soft cloth tightly squeezed, and wash the water temperature sensor with a sponge, or a soft brush.
Do not do this with wet hands when plugging the power plug into the outlet or unplugging it from the outlet.
When cleaning the thermostat body, please do not wet it with water or submerge it.
Do not use it by placing it on a thing that generates heat such as lighting equipment.
Please do not pull the sensor code.
Like the heater, in summer it is recommended to take it out of the aquarium and store it after cleaning it.
【Warranty Period One Year】
Our company firmly packed it, but it was held down during the transportation, and I am very sorry that it has resulted like this.
I sincerely apologize for the defective item.
We will respond to customer's satisfaction.
In case
For troubleshooting, please contact mictuningjp @ 126.com.
Please inform us if there are any points to be improved during use and again.
If you have any problem, do not hesitate to contact us by email,
We will make further efforts to provide services that satisfy our customers.
Features:
- ❀ 【Standard】 Heater part size: 32CM, cord length: 152.4CM, weight: 420G, adaptation tank: 100-200L / 26.5-53 (us gal) Fish tank, power consumption: 300W
- ❀ Temperature indication With digital LED light, keeps the temperature condition of the aquarium stable, keeps it temperature constant (20 ~ 34 ℃).
- With the indicator lamp, the inside of the glass of the heater body has an indicator lamp to indicate that heating is in progress.
- 内蔵 Safety device built-in, if the air conditioner continues and the automatic temperature controller malfunctions, the thermal fuse will operate and cut the power supply.
- (It will not re-revert when the thermal fuse is activated.)
- 採用 There is no thing to disturb the layout of the aquarium by adopting the titanium alloy of the original color.
- Provide high safety to people and organisms
- ❀ Seawater and freshwater are easy to install and use, easy to install, easy to use.
Product information:
Shipping Weight: 399 g
Package Dimensions: 5.79 x 8.30 x 36.09 cm
SHIPPING METHOD
Delivered directly from Japan by Japan Post. It will take 3 to 5 business days to prepare the order for shipping. We guarantee careful packing and safe shipping.Please note that in some cases additional import or VAT charges may incur and have to be borne by the client.
1. Japanpost registered mail
Shipment by Japanpost Registered Mail (Standard). Trackable any time with tracking number. Insurance is not available. Delivery time usually is between 1-3 weeks from the date of dispatch. Some items are not eligible for Standard Shipping.
2. Qxpress Standard
Shipment by Qxpress standard service. Trackable at any time with tracking number. Registered and insured up to a value of item price and shipping fees.Delivery time is usually between 5-10 business days from the date of dispatch.
3. EMS
Shipment by Expedited Mail Service. Trackable at any time with tracking number. Registered and insured up to a value of $200 and usually delivered in 2-6 business day from the date of dispatch.
| Japanpost registered mail | Qexpress | EMS | |
|---|---|---|---|
| Shipping Method | Japanpost Registered Mail (Standard) | Standard Qexpress | EMS (Expedited Mail Service) |
| Trackable | Yes | Yes | Yes |
| Insured | N/A | Yes (Up to item price and shipping fees) | Yes (Up to $200.00) |
| Asia | 1-3 weeks | 5-10 days | 2-5 days |
| Oceania; North America; Central America and the Middle East | 2-4 weeks | 6-14 days | 2-6 days |
| Europe | 2-4 weeks | 6-16 days | 3-8 days |
| South America and Africa | 2-4 weeks | 10-18 days | 4-8 days |
NOTICE:
- For overseas delivery, please be aware that damage to the outer box can be seen.
- If you would like to avoid as much damage as possible, please choose the EMS shipping method.
"According to Qoo10 guide line,overseas shipping fees will be charged to you extra if you choose Qxpress standard shipping.We recommend you to compare the total price of your purchase with EMS."
