GSM GPRS SIM900 1800MHz Short Message Service m590 SMS Module DIY Kit For Arduino

Specification:

Voltage: 5V
Frequency: 900 1800 MHz
Stand by current: < 10 mA
Working current: < 80 mA
Baud: 9600 or change by sending AT+IPR=xxxx
Interface: TTL
Commands: Regular AT commands
Connector: 5V GND TxD RxD
Antenna: Please solder a copper wire to the board or use an IPEX socket
Temperatures: -30 C to 80 C
Functions: Send/receive SMS messages and GPRS data.

Feature:

Excellent for remote sensing， experiments， alarms and automatic data collection.
The control port is a regular serial port. You may connect it directly with a microcontroller such as Arduino. Or you can use a USB to serial port adapter and send commands directly from a computer.
If you also need a USB to serial adapter， please contact us.
A complete instruction for using the AT commands will be provided.

Package includes:

1 x DIY Kit