• This upgraded Flash Speedlite YN-468 is designed for DSLR Camera. It not only has the function of wireless trigger (M)， Slave Trigger (S1， S2)， but also the function E-TTL. What`s more， it has the LED Display， Multi Strobeflash function， and set focus position of the light head manually or Auto Zoom. It`s more professional and higher efficiency.

• It`s very cost-effective， you just need to pay a little money to get the greatest achievement.

• The metering system of this camera will detect flash illumination reflected back from the object so as to automatically control flash output in this mode. In this E-TTL mode， you also make compensation of flash brightness with the " Output contral knob" within the range of 3 ev， with the precision of 1/3 ev. ( The compensation value be added to the compensation value set on the camera.)

• The flash speedlite will move forward and backward with the changes of lens focus to suit different illumintion zones when it is mounted on the camera which supports E-TTL Function， the zoom range is 24mm - 85mm.
• You also set the focus position for the light head manually by pressing the mode swithc button + Power button.

Multi Mode

• It`s the strobeflash mode， the flash light will output the power， flash frequency and time flash you have set.

M mode

• You set flash luminance as per your favorite， luminance level will be displayed by luminance indicator. When taking photos， you only require setting the flash luminance， adjust the camera and press the shutter， the flash light will flash under the camera synchronous signal.

S1 Mode

• It will work with the first work of the master flash synchronously in this mode， with the result consistent with the use of radio slave. ( When you use this mode， your master flash should be set at manaul flash， the TTL flash system with pre-flash function and the red-reduction function with multiple flashes should not be used.)

S2 Mode

• It is very similar to S1 mode， but it support the master flash in TTL mode. In particular， if S1 mode not have correct and synchronous flash with the inbuilt flash， you try to use S2 mode.

1. Multi-Lamp Lighting Application
2. Exposure Bracketing ( FEB)
3. Use Wide-angle Diffuser
4. Rear-curtain Sync
5. FE Lock ( This function only be available when your camera supports it， for the setting of FE lick， refer to your camera manaul)
6. Application of LED
7. Exposure Compensation
8. Feflection Flash
9. Use Reflection Board to take photos

• For Canon 50D， 40D， 30D， 500D/T1i， 450D/Xsi， 400D/Xti， 350D
• (NOT suitable for Canon 1Ds， 1D， 5D， 5DII Series， and 7D)

• 1 X Flash Unit
• 1 X Protector bag
• 1 X Mini stand
• 1 X Diffuser Cover
• 1 X Manual in English & Chinese
• 1 x Free Diffuser

 

 

';