Studio : SODIAL(R)

Publisher : SODIAL(R)

Binding : Electronics

Product Description
* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings. Our products will enhance your experience to unparalleled inspiration.
SODIAL(R)SF 9503 satellite Satellite Finder Search star device
operating range: 52 ~ 60dB
Power supply: DC 13-18V
Dimensions: 108 x 60 x 44 mm
Working process:
1.Switch the receiver on,The digital sat turns on automatically.
2. Roughly align your incorrect on the desired satellite.
3. The SAT has a variety of signal strength 0% display (critical point)
4. Move the dish slightly vertically and horizontally;The higher the scale value of Sat finders, the better the satellite signal;The scale indicates the highest value, you can classify the signal into a smaller level button with the "ATT";Repeat the move of the dish until the maximum value is shown again and a highest buzzer sounds.
5. Check you have found on your TV device, whether the right satellite.
6. Remove the cables on the sat and again connect the LNB to the receiver.
Notes:
To avoid the full beating out the needle, you put the SAT does not directly in front of the bowl.
Please use a 5 dB attenuator, if you use an LNB (such as E.g. high gain) with more than 60dB.
If you have no satellite receiver on hand, you can connect a 13-18V DC power supply with a F-plug at the connection socket of the receiver, to take the sat in operation.
Package Included
1X Digital Satellite Finder
1X User Manual
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3 cm.
0