Flush toilet water-saving device loss cut

Item Descriptions

[Product Description] Easy installation 1 times for 5 liter only be placed in the toilet tank saving about 20 000 yen a year. water pressure can toilet water-saving as it is. Maintenance-free semi-permanent use! ! loss cut is TOTO method INAX method innovative water-saving device that can be used to either. water pressure water flow is as it is and water-saving surely semi-permanently before and after 5L in a single drainage. Mounted with a simple structure is also easy. [mechanism] usually the amount of water is also combined with the injection of waste water at the same time as 2 ~ 3L the float valve in the verge of the water in the tank is empty is lowered the drain port is closed. loss cut by the mounting to close early in the amount of water to about 30% leaving the drain outlet in the tank you can also significantly reduce amount of injected water to water-saving and the full level of wastewater. [Note] is low tank dedicated. The type dedicated to the outside of the tank there is a drainage lever. it can not be used in the following method. ? Haitanku formula (if there is a tank at a high position) ? flush valve type (type there is a direct drainage lever to the water pipe) ? button type (type that does not waste water in the lever operation ) ? because the water-saving function with tank (water-saving feature is provided there is no effect of this product) always check on the drainage tank model of your current please use.