Product Show

Code: S1 Baton

KEY FEATURES
Thumb sized form factor. diameter: 21mm length: 61mm
Stainless steel flashlight head and switch binder ring processed by PVD technology
Recessed silicon switch to prevent accidental operation
TIR lens to create a balanced beam
Positive polarity on the battery faces the tail of the flashlight for enhanced reliability and a more compact size
Built-in timer: 3 minutes or 9 minutes
Flat tail cap design contains a strong magnet providing the ability to place it upside down and use it as a hands-free work light
Thermal management safety program with overheat protection by dropping high output by 50% within 1 minute of constant on. Turbo mode has a limit of 1.5 minutes.
The S1 features a wide range current circuit and can be powered by 1 x CR123A (built-in protected board)
Reverse polarity protection to prevent improper battery installation
INCLUDED ACCESSORIES
Lanyard
User manual

Product Show

Code: S30R

Description
The S30 Baton is a compact and powerful flashlight with a retina-scorching 1000-lumen beam that reaches out to 160 meters (525 ft). There are a total of five different
output settings as well as a strobe mode (1000 lumens for 2 hours)— giving you the variable lighting options you need to take on any task. The S30 also features a power
indicator located on the side switch, which will glow red when your battery power is low. With its dual purpose magnetic tailcap, you can use the S30 as a
hands-free convenient worklight. So whether your changing a tire at night at the side of the road or trekking in the woods, the S30 has you covered.
The specifications in the chart to the right claim to ANSI/NEMA FL1-2009 Standards.
Features
Flush side switch featuring a battery power indicator (glows red when battery is low)
Thermal management saftey program drops high output to 60% after 3 minutes of constant on to prevent overheating
Glow-in-the-dark o-ring in bezel makes it easy to find if dropped or misplaced
99% light transmittance rate through tempered glass with two-sided anti-reflective coating
Multi-function side switch includes five brightness levels and a strobe mode
Automatically return to your last brightness level with the built in memory function
Removable pocket clip
Flat tailcap with strong magnet, providing hands-free illumination for any project
Reliable 6061-T6 aluminum alloy structure with scratch-resistant Type-III hard anodizing
Dual-spring battery housing provides shock absorption that can be used with either flat-top or button top 18650 batteries
Low standby current below 15uA
Item specifications:
LED: CREE Xm-L2 LED
Max output: 1000Lumens
Max runtime: mode 1:1000 lumens/ 1Hours, mode 2:600 lumens/ 2hours , mode 3:100 lumens/ 8hours, mode 4:20 lumens/26 hours,mode 4:1 lumens/720 hours
distance: 160 meters
Max peak beam intensity: 6400cd
Waterproof: IPX-8 Underwater 2m
Impact resistant: 1.5 Meter
Battery:1* 18650 Or 2* CR123A battery
Diameter size:117mm (Length) *25mm(Diamter)
Weight: 73.4g(excluding the battery)

Product Show

Code: S30R

KEY FEATURES
Fast and easy charging. The light features a micro-USB charging dock that includes an additional USB input to charge other devices.
The light is powerful and small with a maximum light output up to 1020 lumens.
The flashlight includes 1 x 18650 3200mAh.
Cree XM-L2 U3. The maximum output is 1020 lumens
Hardened tempered glass with two-sided anti-reflective coating featuring a glow-in-the-dark o-ring
Multi-function side switch with five brightness levels, plus a strobe mode
Flat tail cap with a strong magnet providing the ability to use it as a hands-free work light
Removable pocket clip that is scratch resistant
Thermal management safety program provides overheating protection by dropping high output by 60% after 5 minutes of constant on
Featuring a wide range current circuit. The light can be powered by 2 x CR123A (Cannot be charged).
Reverse polarity protection to prevent improper battery installation
Can be powered by two non-rechargeable CR123A lithium batteries as a last resort in an emergency.
Low standby current below 15uA
INCLUDED ACCESSORIES
Micro-USB cable
rechargeable 18650 batteries
Spare O-rings (x2)
Charging dock
User manual

Product Show

Code: I2 - UK

Product Show

Code: D2 - UK

Product Description
Hottest Selling Nitecore D2 Digicharger LCD Display Battery Charger Original Nitecore Charger EU/US/AU/UK Plug Optional
The Nitecore D2 is a universal smart charger compatible with almost all cylindrical rechargeable batteries, thus eliminating the need to own several chargers. The D2 automatically
detects Li-ion, Ni-MH and Ni-Cd batteries, and through manual selection is also capable of charging LiFePO4 batteries. Intelligent charging circuitry selects the optimal charging
mode (CC, CV and dV/dt) for a given battery and each of the D2's two microcomputer-controlled charging slots then monitors and charges the battery independently.
Furthermore, an integrated digital LCD screen clearly displays charging progress, voltage, current and time while an intelligent automatic power-off function terminates current when charging is complete.
The Nitecore D2: The world's most advanced fully-automatic digital charger. It's as simple as insert, detect and charge.
Features
? Capable of charging 2 batteries simultaneously
? Each of the two battery slots monitors and charges independently
? Compatible with and identifies Li-ion (26650, 22650, 18650, 17670, 18490, 17500, 18350, 16340(RCR123), 14500, 10440), Ni-MH and Ni-Cd (AA, AAA, AAAA, C) rechargeable batteries
? Optimized charging design for IMR batteries
? Integrated LCD panel clearly displays charging parameters and progress
? Two conveniently located side buttons allow easy selection of specific battery types and charging parameters
? Intelligent circuitry detects the battery type and status before entering automatic charge mode (CC, CV, dV/dt)
? Automatically detects battery power status and selects the appropriate voltage and charge mode (with the exception of LiFePO4 batteries which require manual selection)
? Compatible with LiFePO4 batteries
? Compatible with small capacity batteries
? Automatically stops charging when complete
? Features over-charge prevention to protect batteries
? Features temperature monitoring to prevent overheating
? Made from durable ABS (fire retardant / flame resistant)
? Features reverse polarity protection
? Designed for optimal heat dissipation
? Certified by RoHS, CE, FCC and CEC
Package Content
1 * Rechargeable Li-ion Battery Charger
1 * Retail box
1 * Operation Instructions
1 * Charging Cable(EU/US/UK Plug) suitable your country

Product Show

Code: I4 - UK

Product Show

Code: D4 - UK

The Nitecore D4 is a universal smart charger compatible with
almost all cylindrical rechargeable batteries, thus eliminating the
need to own several chargers.
The D4 automatically detects Li-ion, Ni-MH and Ni-Cd
batteries, and through manual selection is also capable of charging
LiFePO4 batteries.
Intelligent charging circuitry selects the
optimal charging mode (CC, CV and dV/dt) for a given battery and
each of the D4's four microcomputer-controlled charging slots then
monitors and charges the battery independently. Furthermore, an
integrated digital LCD screen clearly displays charging progress,
voltage, current and time while an intelligent automatic power-off
function terminates current when charging is complete.
The Nitecore D4: The world's most advanced fully-automatic digital
charger. It's as simple as insert, detect and charge.
Features
? Capable of charging 4 batteries simultaneously
? Each of the four battery slots monitors and charges independently
? Compatible with and identifies Li-ion (26650, 22650, 18650, 17670, 18490, 17500, 18350, 16340(RCR123), 14500, 10440), Ni-MH and Ni-Cd (AA, AAA, AAAA, C) rechargeable batteries
? Optimized charging design for IMR batteries
? Integrated LCD panel clearly displays charging parameters and progress
? Two conveniently located side buttons allow easy selection of specific battery types and charging parameters
? Intelligent circuitry detects the battery type and status before entering automatic charge mode (CC, CV, dV/dt)
? Automatically detects battery power status and selects the appropriate voltage and charge mode (with the exception of LiFePO4 batteries which require manual selection)
? Compatible with LiFePO4 batteries
? Compatible with small capacity batteries
? Automatically stops charging when complete
? Features over-charge prevention to protect batteries
? Features temperature monitoring to prevent overheating
? Made from durable ABS (fire retardant / flame resistant)
? Features reverse polarity protection
? Designed for optimal heat dissipation
? Certified by RoHS, CE, FCC and CEC
? Insured worldwide by Ping An Insurance (Group) Company of China, Ltd.
Package Content:
1 x NiteCore Digicharger D4 Battery Charger
1 x Operation Instructions
1 x Retail box