Instructions:

Any product that can be foamed, such as "Cleanser / Body Wash / Hand Wash / Dishwashing / Shampoo ...", pour into the bottle and pour in clean water or purified water Use the habit of self-deployment) shake the bottle can be mixed

Note:

①, foaming bottle is required for the liquid, the liquid must be a foam liquid, not all liquids are applicable, the liquid can not be granular, powder or pearl powder (liquid is very bright) things in it, Such substances can damage the function of foam nozzles. If you need to wipe the water after the beginning of the use of pressure is very heavy on the description of the liquid can not be foaming substances, please immediately stop using the liquid and the liquid nozzle, try with other liquids and new foam nozzle test.

②, on the market can be bubbling liquid and water must be mixed in a certain proportion before they can be blistered, do not directly into the foam bottle to use.
③, against the ratio (liquid: water = 1: 3 to 9 times the water), some higher viscosity liquid may be appropriate to increase the proportion of water, concrete or look at the original liquid to determine the appropriate ratio of liquid and water to be stirred 2 -3 minutes to confirm that they are fully integrated before they can be used.
④, novices who can start a small amount of liquid and water can be poured into the test, do not pour the entire bottle of liquid, in case of the above problems can reduce the liquid loss.
⑤, foaming bottle material for PET, the solution temperature should not be higher than 40 ℃, otherwise the bottle easily deformed damage