Bluetooth Profiles

BH-02 is a stereo headset with Bluetooth technology. It supports the following Bluetooth profiles:

HSP —— Headset Profile

HFP —— Hands-free Profile

A2DP—— Advanced Audio Distribution Profile

AVRCP——Audio/Video Remote Control Profile

Multifunction button (MFB): answer, end and reject call, pause and play

– key: volume down

Charging the battery with USB cable

Step1: Insert USB charging cable into USB port of PC.
Step2: Connect charging cable with the charging port of headset.
When the red light is on, the headset is charging.
When the blue light is on, the headset is charged fully.
It takes about 3 hours to charge the headset fully.

Warning:

The battery is rechargeable.
First time charging : Before you use this Bluetooth headset, please charge the battery of headset fully

How to use

A Switching on / off headset

Press and hold the MFB for 3 seconds

Blue LED is on for 1 second

Press and hold the MFB for 6 seconds

Red LED is on for 1 second

B Pairing the headset with Bluetooth devices

A) How to enter pairing mode

Be sure BH-02 in power off status first. Press and hold the MFB for 6 seconds, till Red and blue Led blink alternately, or you hear the indication “Do Do” twice come out. And then release the MFB. The unit will become pairing mode.

B) Pairing the headset with Bluetooth mobile phone

Please make sure your mobile phone has Bluetooth function that can be used.

Specific pairing procedures were not the same with different mobile phone. Please refer to your mobile phone manual for further information. Steps as follows:

Please keep the headset and mobile phone in the range of 1 meter when pairing.
Start the Bluetooth function of mobile phone and search the Bluetooth devices.
Make the headset enter into pairing mode (Please refer to “how to enter into pairing mode”).

After searched, select “BH-02”in the Bluetooth device list.

According to indication, enter password or PIN No:”0000”, and press the key of” Yes” or “confirmed”.
After successful pairing, select “BH-02” in the Bluetooth device list, and press “connect”.
After successful connecting, the blue LED of the headset quickly blinks twice or three times every 4 seconds.

Wearing the headset

The string of this headset is retractable, please adjust according to the actual use. Logo “L” of headset represents left ear, Logo “R” of headset represents right ear. Please wear the headset according to the indication of the Logo.

Making calls with the headset

Status of headset

Press and hold MFB for 2s, release it till hearing indication sound

Short press MFB twice quickly

Short press or long press + key. When the volume is adjusted to max, you will hear an indication tone.

Short press or long press – key. When the volume is adjusted to min, you will hear an indication tone.

Press and hold MFB for 1s, and release it till hearing indication sound

Warning: Excessive pressure from headphones can cause hearing loss.

Notes:

For some mobile phones, when you press the key of accepting on the phone, the conversation will be sent to the mobile phone. At this time, you can switch the call to headset by using the conversation switch button or through operating on the mobile phone. Please refer to the instruction of your mobile phone for further information

Playing music

When the headset connects with the mobile phone or Bluetooth transmitter which supports A2DP, you can enjoy music through headset wirelessly.

Status of headset

Short or long press + key. When the volume is adjusted to max, you will hear an indication tone.

Short or long press – key. When the volume is adjusted to min, you will hear an indication tone.

Notes: .

Remote control the function of last song/next song/pause, it needs your mobile phone or Bluetooth transmitter supports AVRCP. Please refer to the instruction of your mobile phone or Bluetooth transmitter. for further information.

LED indicator

Charging

Status of the headset

Red and blue LEDs blink alternately

Blue LED quickly blinks once every 2 seconds.

Not connected to a device

Blue LED gradually turns on and off

Red LED blinks twice every 20 seconds

G Re-connecting to a Bluetooth device

Automatic connecting

Every time the headset is switched on, it will connect to the nearest, and the last connected device automatically.

Manual connecting to last connected device

When the headset is in standby mode and doesn’t connect to any devices, short press MFB button once, it will connect to last connected device automatically.

AT-BT802 Wireless Bluetooth Stereo Headset Headphones With Mic

Features:

Brand New High Quality
Quantity:1pcs
MP3 player + FM radio + Streo Headset combo+bluetooth
Bluetooth wireless technology
Built-in microphone ear
Closed design
Allow you to enjoy digital-quality music wirelessly and convert between music and phone calling mode freely
Support TF card
Support FM,can receive high-quality stereo radio
Support bluetooth stereo devices to receive A2dp
Accept incoming calls or toggle between tracks with the touch of a button.
Omni-directional high quality microphone.
Great sound with control
Wireless VOL adjustment function, volume output comfortable grasp.
Volume control, selections, and telephone answering hood integrated in the ear cup
High-grade breathable leather, soft and comfortable, to ensure long-wearing comfort.
Easily charge via USB cable.
Color:Black,White,Red,Purple(If you need designated color, please contact us, otherwise we will randomly shipped to you)

Specifications:

Bluetooth Version	V2.1+EDR
Operation version	10 m
Range of frequency	2.4 to 2.4835GHZISM band
Sensitivity	-85dB
Music format	MP3/WMA
TF card support	128M-32GB
FM frequency response	87.5-108MHZ
Rechargeable lithium battery	350mAh

Package includes:

1 x Bluetooth Stereo Headset(with retail package)
1 x USB Cable
1 x Audio cable
1 x User Manual

AT-BT803 Wireless Bluetooth Stereo Headset

Model no	BH-02	Ver.	Bluetooth V2.1+EDR
Bluetooth Profiles	HSP,HFP,A2DP,AVRCP	Effective Range	10Meters
Music Time	10 Hours	Talk Time	11Hours
Standby Time	Up to 250 Hours	Iuput	DC : 5V/180mAh
Charge Time	3 Hour	Dimensions	14.5106CM

1	Retractable string	2	< key :last song
3	> key :next song	4	LED Indicator
5	Multifunction button (MFB): answer, end and reject call, pause and play
6	+ key: volume up	7	– key: volume down
8	Charging port	9	Built-in microphone

Function	Operation	LED indicator	Indication tone
Switch on	Press and hold the MFB for 3 seconds	Blue LED is on for 1 second	“Do Do Do” tone
Switch off	Press and hold the MFB for 6 seconds	Red LED is on for 1 second	“Do Do DO” tone

Function	Status of headset	Operation
Voice dial	Standby mode	Press and hold MFB for 2s, release it till hearing indication sound
Redial last number	Standby mode	Short press MFB twice quickly
Volume up	Conversation mode	Short press or long press + key. When the volume is adjusted to max, you will hear an indication tone.
Volume down	Conversation mode	Short press or long press – key. When the volume is adjusted to min, you will hear an indication tone.
Answer calling	Ringing	Short press MFB
Reject calling	Ringing	Press and hold MFB for 1s, and release it till hearing indication sound

LED indicator	Status of the headset
Red LED is on	Charging
Blue LED is on	Finish charging