Product parameters:
<br />
<br />Accurate: measuring deviation plus or minus 0.2 degrees or less.(imported infrared detection system)
<br />
<br />Fast: measuring time &lt; 1 second.
<br />
<br />Easy to use: a key measurement, convenient operation.
<br />
<br />Non-contact: the forehead to the human body measurements, not contact with human skin.
<br />
<br />Measuring distance: within 1cm can adapt to, without a fixed distance measurement.
<br />
<br />Temperature alarm: freedom to set alarm temperature.
<br />
<br />Data storage: stored in 20 measurement data, facilitate analysis reference contrast.
<br />
<br />Modify Settings: you can change the set parameters, in order to adapt to the different color of skin race (black, white, yellow race, etc.)
<br />
<br />Unit conversion: use degrees Celsius, Fahrenheit can transform each other.
<br />
<br />
<br />
<br />Using Method:
<br />
<br />The correct method of use is the key to test the accuracy, otherwise it may cause measurement errors.
<br />
<br />Because the infrared measurement on the surrounding environment of the demand is higher, therefore, please follow these instructions.
<br />
<br />1. The temperature, the instrument should be pointing to his forehead before - above the eyebrows and remain vertical, monitoring site cannot be hair shade, instrument and the distance from the forehead suggested in 1cm.
<br />
<br />2. When the person being measured from measuring temperature differences, at least in the test environment for 5 minutes, after being consistent with the environmental temperature measurement again, otherwise will affect the measurement result.
<br />
<br />3. Cold fever patient forehead, sweating, and other cooling measures can make the measurement result is low, after should be avoided in this case.
<br />
<br />4. Products from the place where and environmental temperature differences under test out, when using instruments should be placed on the use environment of the reoccupy after 20 minutes.
<br />
<br />5. Measured the surrounding environment should be stable, not in the outlet of the fan, air conditioner and so on air flow test larger place.
<br />
<br />6. Cannot be used outside or in strong sunshine place to the instrument.
<br />
<br />
<br />Technical characteristics:
<br />
<br />1. The normal conditions of use temperature: temperature: 10 ¡ãC to 40 ¡ãC
<br />
<br />2. Power supply: 2x AAA batteries
<br />(Not include)
<br />
<br />3. The measuring range:
<br />
<br />Body temperature pattern: 32 ¡ãC ~ 43 ¡ãC
<br />
<br />Object mode: 0 ¡ãC ~ 100 ¡ãC
<br />
<br />4. Accuracy: 0.1 ¡ãC
<br />
<br />5. Measuring distance: within 1cm
<br />
<br />6. Automatic power-off: 60 seconds
<br />
<br />
<br />Package include:
<br />
<br />1X Non-contact Infrared Forehead thermometer