Features:
Compact size. Easy to install.
Easy to read with LED back light Digital Display.
With reverse protection, won't burnt if connect reversely.
Low battery flashing alert function.
12V 24V 36V 48V 56V 60V 72V 84V 96V Acid Lead Battery Indicator with Voltage and Temperature Meter.
Widely used in substation automation, distribution automation,test equipment, voltage regulator and so on.

Specifications:
Case: Black
Display: LED display
Voltage Working Range: DC 6 - 120 V
Acid Lead Voltage Measure Range: 12V 24V 36V 48V 56V 60V 72V 84V 96V
Measuring Temperature: -50¡ãC ~ +120¡ãC / -58¡ãF ~ +245¡ãF
Accuracy: 1%
Working Current: < 20 mA
Refresh rate: about 500mS/time
Size: 54mm x 30mm x 27mm / 2.1" x 1.2" x 1.1"
Mounting Panel size: 47.2 x 27.3mm / 1.9" x 1.1"
Working Temperature: -10 ~ + 55 ¡ãC
Operating Humidity: 10 - 80 %
Working Pressure: 80 - 106 kPa
Voltmeter accuracy: 1%
Probe Type: NTC (The probe is not waterproof, please do not immerse it into water)
Probe Length: >120mm
Wire Length: >150mm

Wire Connection:
Black Wire: Connect negative electrode
Red Wire: Connect positive

How to Set:
This tester's factory default setting is for 12V lead-acid battery temperature (¡ãC), power and voltage alternately display, If you need to test other batteries, you can re-set the tester by yourself.

1. Hold the button for 3 seconds until it display 1-U, release and press the button again to switch mode from one to another: 1-U 2-b, 3-C, 4-d, 5-t.

2. Hold the button for 3 seconds while displaying "1-U" to enter voltage fine tuning mode. Release and hold the button, the voltage will trimming up, release and hold the button again, the voltage will trimming down, can be repeatedly adjusted to reach the value and release the button. The screen flashes, the setting will be automatically saved.

3. Hold the button for 3 seconds while displaying "2-b" to enter battery choosing mode. 12.0V represents a single section 12V lead-acid battery, 3.7V represents a single polymer lithium battery, 3.2V represents a single lithium iron phosphate battery, 1.2V represents a single 1.2V NiMH batteries.

4. Hold the button for 3 seconds while displaying "3-C" to enter battery section choosing mode. The number of different types of batteries can be adjusted as follows: 12V lead-acid batteries 1-8section, 3.7V lithium battery 2-28 section, 3.2V lithium-ion battery 3-32 section, 1.2V NiMH battery 10-70 section.

5. Hold the button for 3 seconds while displaying "4-d" to enter display choosing mode. C mode shows temperature in Celsius; V mode shows voltage; % mode shows battery percentage; V% mode shows voltage and percentage alternately.
(CV%--F--FV--F%--FV%--V--%--V%--C--CV--C%--CV%)

6. Hold the button for 3 seconds while displaying "5-t" to enter temperature fine tuning mode. Release and hold the button, the temperature will trimming up, release and hold the button again, the temperature will trimming down, can be repeatedly adjusted to reach the value and release the button. The screen flashes, the setting will be automatically saved.

After each value set, the screen will flash, the setting will be automatically saved, and then the tester will exit the setting mode.

Package Includes:
1 x Digital Battery Capacity Meter Voltmeter (Default 12V)