Descriptions:
FY - 41AP - M is an inertial attitude measurement instrument used for FPV flight on multirotor aircrafts. It has an integrated OSD video overlay system that presents critical flight information such as power management・ airspeed・ altitude・ and flight direction via its electronic compass・ allowing for a clear visual flight while ensuring key information is within sight.

Flight stabilization is achieved via an integrated 3 axis gyro・ 3 axis accelerometer・ 3 axis magnetometer and a barometric pressure sensor. This enables the module to accurately measure flight attitude・ earth azimuth and relative altitude to achieve:
- Extremely stable conventional flight pattern
- Stabilized 3D flight
- Automatically return to home (RTL)
- Fixed altitude flight
- Heading lock flight
- GPS waypoint flight
- Auto circling over a fixed GPS location.



Main Features:
¢ Attitude Stabilized Mode: FY-41AP-M can auto stabilize the aircraft flight attitude in this mode・ pitch and roll stick center position for 0 degree attitude・its endpoint is 35 degree. Yaw stick in the center position will lock current course ・ its endpoint corresponding maximum rotation rate 135 degree per second・ Throttle stick direct control aircraft climb and decline・ climbing and declining rate is directly related to the throttle.

¢ Hovering Mode: In this Mode・ without GPS location・ auto locks the altitude・ in maximum means climb rate is 3 m/s・ in minimum means decline rate is 1.5 m/s.The GPS Module must be connected .When the GPS is connected and at least 5 GPS satellites detected・when Pitch・ roll sticks released will lock the new position.

¢ Auto Return To Home Mode: The GPS Module must be connected to the DoS with at least 5 GPS satellites detected.In this Mode・will auto return to home points and auto landing.

¢ Camera Gimbal Stabilization: FY - 41AP multi-rotor firmware・when is used to control the aircraft under 6 axis・ can simultaneously control two axis Camera Gimbal Stabilization.

OSD Video Overlay System Function
First Person View (FPV): FY - 41AP has an integrated OSD video overlay system that presents critical flight information on the video for easy enjoy FPV・ at the same time・ Auto stable・ Fixed altitude & Heading lock・ Waypoint Navigation ・ Auto Return To Home function will make FPV operation more easy.

OSD is an essential part for FPV. The FY - 41AP can adapt both PAL and NTSC video signals. The entire adaptive process is completed approximately within 1 second.

Integrated OSD Video Overlay System: FY - 41AP overlays flight telemetry information onto video image. Information displayed includes: Altitude・ Speed・ Direction・ Home Direction and many more.



Supported multi-rotors: Quadcopter I4・ X4 / Hexacopter I6・ X6・ IY6・ Y6 / Octocopter I8・ X8
Supported ESC output: 400Hz refresh frequency
Recommended transmitter: PCM or 2.4GHz with minimum 6 channels
FY - 41AP Module Working Voltage: 5.3V at 0.2A ( Powered by Power Manager )
Working voltage range: Power of battery 7 - 26V ( 2S - 6S )
Measuring current: 0 - 25A
Power for FY - 41AP Lite module: 5.3V 2A
Power for video transmission system: 12V 2A
Operating temperature: -10centigrade to 50centigrade
Assistant software system requirement: Windows XP sp3 / Windows 7 / Windows 8

Hardware:
FY-41AP: 34g (58 x 37 x 19mm);

GPS: 24g (32 x 32 x 13.5mm);

Air speed senor: 9g (64 x 13.5 x 13.5mm);

Power Manager: 35g(50 x 24 x 18mm)

Specifications
Specifications
Type: Balancer・ Spare Set・ Balancer
Dimension and Weight
Package Weight: 0.07 kg
Package Size (L x W x H): 10 x 8 x 5 cm / 3.93 x 3.14 x 1.97 inches
Package Contents
Package Contents: 1 x FY - 41AP - A・ 1 x GPS・ 1 x Power Model・ 1 x Anti - Shock Absorber・ 1 x GPS Holder



Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys・ knives・ etc.)・ we recommend proper supervision as we cannot be held liable for misuse or accidents.

Disclaimer:
We do not accept any responsibility or liability for the incorrect purchase of our products. All of the products on the website are extensively tested to comply with rigorous and strict QC standards. For all of our clothing products・ items and accessories・ please take careful note of the precise measurements・ mainly shown in centimeters (CM). As part of our company policy・ we will not be able to accept returns or provide refunds for items which are the wrong size.