ZOOZ Zooz Z-Wave Plus On Off Wall Switch ZEN21 (White) VER. 2.0, Works with Existing Regular 3-Way Switch
FAST Z-WAVE: Manual or remote on/off control from your mobile device or computer (when included to a Z-Wave gateway controller - sold separately).
DIRECT 3-WAY SOLUTION: no add-on switch needed! Works with regular 3-way switches as long as NEUTRAL is present.
SMART SKILLS: Reports status instantly. Remembers and restores on/off status after power failure.
SIMPLY COMPATIBLE: Based on the universal binary switch command class - supported by most Z-Wave controllers. Z-Wave Plus certifiedbetter range and communication speed.
QUICK INSTALLATION: Just tap the UPPER paddle 3 times while the hub is inclusion mode to add to your network. Follow wiring instructions carefully. NEUTRAL WIRE REQUIRED!
Technical DetailsProduct DetailsPackage DimensionsWidth : 3.11 inch
Height : 2.52 inch
Length : 5.12 inch
Shipping Weight: 0 ounce (View shipping rates and policies)
ASIN : B074CJ1ZRF
Product DescriptionNOTE: Do NOT connect this switch to ceiling fans, motors, or home appliances
NEUTRAL WIRE REQUIRED
SPECIFICATIONS:- Model Number: ZEN21 V2
- Z-Wave Signal Frequency: 908.42 MHz
- Power: 120 VAC, 60 Hz
- Minimum Load: 15W for LED and CFL bulbs
- Maximum Loads: 960W Incandescent, 150W LED''s and CFL''s, 1800W (15A) Resistive
- Z-Wave Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module
- Operating Temperature: 32-104° F (0-40° C)
- Installation and Use: Indoor only
Will it work with Alexa?
Amazon Echo is not a Z-Wave controller so you will need a compatible Z-Wave hub to control this switch with Alexa.
Alexa-compatible Z-Wave hubs include:
- Fibaro Home Center Lite
- SmartThings
- VeraPlus
- Wink