GE 73259

RG6 Twist-On "F"Connectors















Weatherproof twist-on connectors; easily assemble
RG6 coax cables or replace broken connectors. 2 pk



Instruction:
1. Strip about 3/4" (2cm) of outer vinyl jacket (A) from end of coax cable.

2. Roll exposed shield wire (B) back cover vinyl jack and trim off excess. Leave
about 1/8" (3.5mm) of shield wire folded over outer jacket.

3. Strip 1/4" (7mm) of plastic insulation (C) from end of cable, exposing 1/4"
(7mm) of centerconductor wire (D).

4. Place Twist-On cable Connector (E) onto cable and tighten by twisting
clockwise until approximately 1/16" (1.75mm) of centerconductor wire extends
beyond end of conductor.