1, normal time mode: normal time screen display hours, minutes, seconds, week.
1.1 Press the START key to display the date.
1.2 Press RESET to display the daily alarm time.
1.3 Press MODE to enter the running seconds mode.
1.4 Press the LIGHT button light for 3 seconds.
1.5 Press the RESET+START key to turn the daily alarm on/off. The corresponding icon is displayed/disappeared; press and hold the two keys to sound a bibi.
1.6 Press the RESET+MODE key to turn on/off the hourly chronograph (weekly display is on, otherwise it is off).
★ Press and hold RESET + START + MODE three buttons in any state, the screen will be displayed in full, and if it is released, it will return.
2, the second mode: from the normal time mode press MODE key once into the second mode.
2.1 Press the START key to start/stop the run time.
2.2 When the running seconds stop, press the RESET key to reset the running seconds to zero.
2.3 When the running seconds are running, press RESET button to extract a segment time, and the running seconds picture is stopped (but the running seconds is not stopped but still running behind): If you press RESET button, the screen displays the total running seconds value; if you press START The key, the running seconds in the background stops, but the screen still stops. Press the RESET key again to display the value when the running seconds stop.
3. Daily alarm setting: Press MODE key twice from normal time mode to enter daily alarm setting status, the time bit flashes.
3.1 Press RESET to switch the setting object: hour
3.2 Press the START key to adjust the corresponding value and hold down the key for quick adjustment.
3.3 Daily alarm setting is completed, press MODE key to save and exit the setting, go to normal time mode.
★ The daily alarm is turned on. When the alarm time is reached, a one-minute bibi sound will be issued. During the alarm, if you press the START key, the alarm will be played again after 5 minutes.
4. Normal time setting: Press the MODE key three times from the normal time mode to enter the normal time setting state, and the second digit flashes.
4.1 Press the RESET key to switch the setting object: seconds, minutes, days, months, and weeks
4.2 Press the START key to adjust the corresponding value. Hold down the key for quick adjustment (except for the second digit). Press the START key for the seconds adjustment to return the value to 0. If the second value is greater than or equal to 30, the score increases by 1 at the same time.
4.3 When the time is set, press the START key to select the 12/24 hour display format.
4.4 After the normal time setting is completed, press the MODE key to save and exit the setting state, and go to the normal time mode.
1 Press MODE once to enter stopwatch
2 Press START once to start timing, press START again to stop timing
3 Press the secondary MODE to enter the alarm adjustment
4 Press RESET to change options and press START to adjust the time
5 Press MODE three times to enter timedateweek adjustment
6 Press START to adjust second
7 Press RESET once, press START to adjust the score
8 Press RESET twice, press START to adjust the hour (you can choose last hour or 24 hours)
9Press RESET three times, press START to adjust the date
10Press RESET four times, press START to adjust month
11 Press RESET five times, press START to adjust the week
Alarm adjustment: starting from the most out of the interface, with the press of START and RESET is the alarm switch, at the same time pay attention to there will be a small bell pattern or other display alarm switch. After the alarm sounds, press RESET to turn off the alarm. If you press START to stop the alarm, the alarm will sound after five minutes.
Size 1 Specification:
• Dial diameter: 37mm
• Case Thickness: 15.36mm
• Strap width: 17.88mm
• Strap Thickness: 2mm
• Watch NW: 37.1g
• Full length: 23.6cm
Size 2 Specification:
• Case Diameter: 5.5 cm
• Case Thickness: 1.45 cm
• Min. Wrist Circumference: 17.5 cm
• Max. Wrist Circumference: 22.5 cm
• Band Length: 20.0 cm
• Band adjustable: Yes








