Comfortable laminating speed

Laminating speed up to 400mm/min, use out of the laminating, greatly improves the work efficiency.

120" Warm up time only

Take advanced NTC heating system, warming up time only need 120", good temperature stability, heating uniformity, Present perfect no bubble super smooth powder coating effect.

A straight cutter as a big gift

Do you still worry about that cannot find tools to cut laminated photos? Cannot cut straight with scissor? Cannot put pictures into laminating film? A smart paper cutter meets all your basic straight cutting requirement.

Function: Cold / Hot

Max. thickness: 0.5mm

Max. pouch width: 330mm

Pouch range: 80mic-125mic

Speed: 400mm / min

Pre-heating time: 1.5-2min

Temperature controlling sys: NTC

Electric current: 1.75A

Power consumption: 400W

Voltage: AC 220-240V 50 Hz

Machine size: 462x151.6x66.5 mm

Laminating Steps

Operation steps (3 actions only)

1. Choose accurate laminating film, put the document as flat as possible in.the film.

2. Turn the power switch to Hot, red indicator will be on at the same time and green light flash.

3. Green light will be stable status, put the document with film into the laminator and the closing end should be go first. 

1. The paper cutter is installed at the bottom of the laminator; Take it out from the bottom. 

2. Put the paper need to cut between base and sliding rail.

3. Press the cutter head to cut.