purchase notes:

1: Please indicate special requirements， otherwise we shall not be responsible for!

2 : Product is borne power amplifier shell， does not contain internal parts.

3: A single set of weight 3.1 kg. In order to transportation safety，

After packing weight 4 kg

4:Chassis machine foot hole is not open(Convenience of their own design)

5: Accessories: screws，power seat ， a set of rubber machine feet.

6:Special requirement must be described clearly in the postscript， otherwise we will not responsible for the things left out.

 

Specific structural dimensions:

External dimensions: width= 320mm Height= 92mm Depth = 308mm

Internal dimensions: Width= 310mm Height= 84mm Depth = 297mm

Eachpart of the material thickness

The front panel: Thickness = 8 mm

The rear panel: Thickness = 3 mm

The Cover panel : Thickness = 3mm

The floor panel :Thickness =3mm

the side panel is aluminum materials，the thickness=4mm

the front panel not opened ，the rear panel opened power socket hole，we aslo can drill for you. 

 

 About drill:

General diagrammatic drawing opening 4.9USD or more.

Precisely drilling hole according to the drawing of 8USD or more.

below the diameter of12mm round hole(included the 12mm)can be completed in the drilling press 0.17USD each.

screw hole 0.35 USD each.

The diameter of volume more than 12mm 1.7 USD each.

the big hole and square hole charge according to the size and quantity.

the picture

 

 

the materials size:

 

 

 

Sign-off instruction

Please open your parcels and check out the goods .Your goods in the packing maybe was damaged in transit or during the unloading process or by other reasons， even the external condition of packing is ok. You can contact with customer and refuse the shipment， if you find the goods have some damage or different with the described on the webpage. Otherwise we will not responsible for the damage after you sign for the parcel.

';