产品功能描述：
1、 蓝牙音频接收器是一款高性价比的蓝牙立体声音频接收装置，可以搭配蓝牙立体声音频发射器或笔记本蓝牙实现室内无线高保真音频传输。
2、标准3.5mm线路输出端口可直接与音响线路输入端口相连接，不需额外的线路放大的情况下，输出电平可使音响达到全功率输出。
3、通过与不同发射设备的连接和断开操作实现免布线、零插拔的音源切换功能，省去传统音响设备切换音源需要插拔连接线的烦恼。
4、 解除了连接线对用户的束缚，使用户可以在室内任意位置享受高保真音乐而不必将音源设备放置在音响一米以内的范围。
5、标准的mini USB电源接口可以使用包括电脑USB接口在内的任何USB兼容电源供电，内置电池方便携带使用。
产品特色：
只需要在普通音箱音频输入插头处插上小小的外置蓝牙接收器（尺寸大小如U盘），普通音箱马上摇身变成高档的蓝牙音箱！插上外置蓝牙接收器，任何具有蓝牙功能的手机，蓝牙电脑等数码产品就能通过外置蓝牙接收器在普通音箱上播放出声音！省去音箱插线不够长，音箱摆放位置不方便等诸多烦恼！
该产品可当成音箱的新增功能配件，给需要的客户提供更好的服务，灵活方便，不插就是普通的音箱，插上就成了带有蓝牙功能的音箱，而不用刻意去设计生产新款的蓝牙音箱。
1、操作简单，插上音箱音频输入线即可使用，普通音箱瞬间变蓝牙音箱。
2、小型化，人性化设计，携带方便，美观。
3、可选配适配器直接插电源，也可使用电脑USB接口充电。
4、电池工作时间长，充好电连续可以工作3-4小时
5、超长的待机时间，时长可达4到5天。
6、支持iPad， iPhone， 蓝牙手机，蓝牙电脑等所有具有蓝牙功能的数码产品
技术参数：
符合蓝牙2.0规范。
5V DC充电。电池容量约200MAH(连续工件3-4小时)
传输距离5-8米。
双色LED指示，单红灯是以充电，电蓝灯在闪是对上机，红蓝交替闪是准备对机。
1个电源开关。
1个标准3.5mm DC JACK线路输出。
1个标准mini USB充电接口。
1条USB充电线。
操作步骤：
长按开关键，直到红色LED灯和蓝色LED灯开始交互闪烁后松开按键，再稍过几秒钟后红蓝灯开始闪烁进入配对模式，当此设备进入配对模式后，将你的蓝牙电脑或是手机等及其它具有蓝牙功能的数码产品打开蓝牙功能，并搜索蓝牙设备或寻找新设备，正常后找到的蓝牙产品型号为BYL-918，点击此型号时本设备要求输入配对密码，密码默认为：0000。若已连接过此设备时，不会提示配对密码会自动连上(只能同时连上一个设备)
配对成功后，红灯熄灭，蓝灯慢闪表示连接上，连接后即可用播放器播放音乐。
正常工作时，若要更改播放设备，需中断正在连接的蓝牙电脑，手机等设备，同时再与其它蓝牙设备进行配对连接。
在充电时最好选择关机充电，充电过程中红灯点亮，充电电满后红灯熄灭。
基本配置附件
注意事项：
1、若是新机或长时间不用此设备，可能出现内部电池不足，需连接电脑USB或充电后方可正常使用。
2、不得将本机搁置于高温、潮湿的环境中，请置于通风、干燥处；更不得淋雨或强力冲击本机。
3、不得随意打开机壳，以防电源短路而损坏其它的配件！。
5、不使用本机时，请将开关键按到关机，直到没有看到指示灯有发光为止
箱规：57*34*31 100PCSProduct Description:
1， Bluetooth Audio Receiver is a high performance Bluetooth stereo audio receiving device can be used with Bluetooth stereo audio transmitter or laptop Bluetooth achieve indoor wireless fidelity audio transmission.
2， under standard 3.5mm line-out port can be directly connected to the audio line input port， no additional amplification circuit， the output level of the sound can reach full power output.
3， by connecting and disconnecting operation of equipment to achieve different emission-free wiring， zero insertion of audio switching function， eliminating the need for traditional audio equipment to switch audio plug cable trouble.
4， lifting the shackles of cable users， allowing users to enjoy high-fidelity music anywhere in the room without having the source device is placed in the range of one meter or less sound.
5， a standard mini USB power connector can be used include any USB compatible computer USB port， including power supply， built-in battery portable use.
feature of product:
Just plug in an ordinary small speaker audio input plug at external Bluetooth receiver (such as U disk size)， ordinary speakers now suddenly become a high-end Bluetooth speaker! Plug in an external Bluetooth receiver， any mobile phone， Bluetooth， computers and other digital products with Bluetooth via external Bluetooth receiver can play a sound on ordinary speakers! Eliminating speaker plug wire is not long enough， the speaker placement inconvenience a lot of trouble!
The product can function as speaker of the new accessories to customer needs to provide better service， flexible， plug is not ordinary speakers， plug in the Bluetooth speaker with to become， rather than deliberate design to production of the new Bluetooth speakers.
1， simple operation， plug the speaker audio input cable to use， ordinary speakers instantly become Bluetooth speakers.
2， compact， user-friendly design， easy to carry and beautiful.
3， optional power adapter plug directly， can also use the computer USB interface to charge.
4， the battery for a long time， fully charged can work continuously for 3-4 hours
5， long standby time， duration of up to 4-5 days.
6， support iPad， iPhone， Bluetooth cell phones， computers and other Bluetooth all Bluetooth-enabled digital products
Technical Parameters:
Compliant with the Bluetooth 2.0 specification.
5V DC charging. Battery capacity about 200MAH (3-4 hours continuous workpiece)
Transmission distance of 5-8 meters.
Two-color LED indication， single red light is charging， electric blue light is flashing on the machine is ready to flash alternately red and blue aircraft.
A power switch.
A standard 3.5mm DC JACK line output.
A standard mini USB charging port.
A USB charging cable.
Steps:
Under the open key， until the red LED rear lights and blue LED light starts blinking interactive release the button， then wait a few seconds after the red and blue lights start flashing to enter pairing mode when the device goes into pairing mode， your Bluetooth computer or mobile phone and other digital products， and other Bluetooth-enabled Bluetooth feature and search for Bluetooth devices or looking for a new device， found after normal Bluetooth product model BYL-918， this device requires a passcode click to enter this model， the password the default is: 0000. When you have connected through this device does not prompt the pairing password will automatically connect (only while connected to a device)
After successful pairing， the red light is off， slow flashing blue light indicates the connection， the connection can be used after the music player to play.
During normal operation， to change the playback device， you need to interrupt the Bluetooth connection computers， mobile phones and other devices， and then connect with other Bluetooth devices paired.
When charging the best choice for off charging， charging red light， full power after charging the red light goes out.
The basic configuration Accessories
Precautions:
1， if the new machine or for a long time without this device may appear insufficient internal battery， before normal use after charging to be connected to a computer or USB.
2， the machine may not be set aside in a hot， humid environment， please placed in ventilated， dry place; more rain or strong impact may not be native.
3， not free to open the case， the power to prevent a short circuit and damage other parts! .
5， when not using the unit， set the key to open the press to shut down until the lights have not seen the light emitting far
Carton: 57 * 34 * 31 100PCS
