1.Receiver

Channel: 16CH

Control Types: Toggle, Momentary, Latched

Decode: Learning code

Power Supply (Operating Voltage): DC12V

Relay: 7A/120VAC, 7A/277VDC

Work Voltage Range of Relay: AC 110~240V or DC 0~28

State current: ≤6mA

Received sensitive:>=-105 dBm

Temperature:-40-80

2.Transmitter

Channel: 16CH

Distance:0-1000M. this is ideal distance without any block and signal interference,it will be 50% off about block and interference.

Encode: Fixed code, Soldering

Power Supply: 1 x 23A-12V battery ( Do not included)

 

Main Features:

1. Convenient to operate and easy to use

2. Stable performance and low-power consumption, long service life

3. Compact, high sensitivity, and easy to debug

 

Description:

The wireless controller, receiver with high confidentiality, large storage capacity, stable performance, low power consumption characteristic, and easy to use, without the traditional jump line or dial the code switch coding, the wireless signal emitted by just put the remote control for the receiving controller receives and storage, can be realized.Lost in use process, if learn good remote control need to clear the receiving controller in the storage of information, will not be lost by the remote control to remote control of the receiving controller, to regain access to relearn again by the master to use.

 

Manner of working:

APDC - 15/16 l have five works: signal self-locking, signal interlocking, signals the lock, and since the locks and the lock

1. the signals from the lock - press 1 key learning

2. lock, signal, press 2 key learning

3. signal interlocking, press the remote control 3 key learning

4. 1 ~ 8 signal self-locking and 9 ~ 16 road not lock coexist, press the 4 key learning

5. signal 1 self-locking and 2 ~ 16 road not lock coexist, according to the 5 key learning remote control

 

Output way:

1, the signals from the lock: press 1 key learning

Press key 1, and 1 key corresponding relay merger keep absorption, then press 1, no. 1 relay disconnected;Press key # 2 and # 2 keys corresponding relay merger keep absorption, and then press 2, no. 2 relay disconnected;3 ~ 16 key work according to the loop.

2, signal not lock: press 2 remote control study

Hold the remote control key 1, and the corresponding relays and 1 key, let go after the relay disconnect, press key # 2 and with the corresponding relay and 2 key, let go after disconnection;3 ~ 16 key work according to the loop.

3, signal interlocking, press the remote control 3 key learning

Press 1 key, relay merger keep absorption of no. 1, press 2, no. 1 relay disconnect, merger with 2 keys corresponding relay suck keep;3 ~ 16 key work according to the loop.

4, 1 ~ 8 signal self-locking and 9 ~ 16 road not lock coexist: press the 4 key learning

Corresponding with the remote control 15 relay, among them 1 ~ 8 road for self-locking function, 9 ~ 16 road for the lock function.

5, signal 1 self-locking and 2 ~ 16 road not lock coexist: according to the 5 key learning remote control

16 and corresponding remote control relay, among them 1 road for self-locking function, 9 ~ 16 road for the lock function.

 

Learning method:

After the learning key light on, press the receiver is to let it go, into the learning state;The function of according to their own needs to choose according to the study, a button of the remote control receiver after receiving the signal indicator lights flashing once said about learning success.

 

Remove method:

Long press on the receiver about eight seconds until the indicator light goes out, says it has clear success.The receiver can store different coding about remote control 30.