Product Description
Avoid the hassle of running wires under carpet or along your baseboards, just use the Dayton Audio XRA25. Connect line-level right and left channel inputs or high-level (speaker) inputs from your A/V receiver to the XRA25 transmitter. Your audio signal is then sent wirelessly to the XRA25's receiver in the rear of your home theater. The built-in 25 watt per channel amplifier provides a generous amount of power to drive rear channel speakers. Control the volume of your rear channels speakers with the volume knob on the receiver/amplifier. 34-transmitting channels provide options for interference-free operation. Expand your subwoofer placement options with the XRA25. The subwoofer channel provides a wireless path for a LFE signal from the A/V receiver to feed a powered subwoofer at the rear of the room. The XRA25 includes a transmitter unit, receiver/amplifier unit, two power supplies, two sets of 6 ft. speaker wire, and two vertical stands. If any interference is experienced with the system, press and hold the "M" button on the transmitter and receiver simultaneously; the units will pair automatically. Specifications: Power output: 25 watts at 4 ohms, 12 watts at 8 ohms Frequency response: 20-20,000 Hz Subwoofer output: 2V Input sensitivity: 1V (line in), 2V (subwoofer in), 10V (speaker in) Total harmonic distortion: <10% at 4 ohms Signal to noise ratio: >80 dB Range: 100 ft. Dimensions: 1.6" H x 6.9" W x 3.9" D.Feature
No need to run long speaker cables, the XRA25 takes care of it wirelessly