The Super-Vision Film is made effective through absorption of sunlight. The film resists water droplets formation but instead spread evenly and thinly over the surface， maintain visibility even in the rain.

EASY TO APPLY

 1. Wash the side mirrow a clean sponge and water removing all dirt and deposits. Rinse thoroughly with clean water.
 2. Thoroughly wet the side mirrow using a wet sponge or a water sprayer.
 3. Remove the Super-Vision Film from the mount while taking care to touch the film surface as little as possible.
 4. Wet the adhesive side of the Super-Vision Film using a water sprayer or a wet sponge.
 5. Place the Super-Vision Film on the mirrow surface with the adhesive side to the mirrow surface.
 6. Place the Application Film over the Super-Vision Film， then remove all water and air bubbles  between the Super-Vision Film and mirrow surface using the included squeegee.
 7. Remove the Application  Film from the mirrow.
 8. After Super-Vision Film is exposed to sunlight for a few days， its benefits will become apparent.

Film Size : 80mm x 130mm

Contents :
 - Super-Vision Film 2 sheets
 - Squeegee 1 pc
 - Application Film 1 sheet
 - Sponge 1 pc