XTAR VP1 VP2 VP4 VC2 VC4 MC1 Plus MC1 MC2 charger Digicharger LCD Display Battery Charger Universal Charger Fit Li-ion/LifeP04/Ni-MH/Ni-Cd Batteries Charging
XTAR VP1
2 Channels 10440/16340/14500/14650/17500/17670/18350/18500/18650/18700 3.6V/3.7V XTAR VP1 Intelli-Battery Charger Operation Temperature: Room temperature 0~40 C
Input AC: 12V DC 1000mA
0.25A CC :250mAh±30mAh
0.5A CC :500mAh±50mAh
1.0A CC :1000mAh±80mAh
Cut-off Voltage: 4.2V±0.05V
Detection precision:±0.03V
Weight: 95g
Size(mm): 118.0 length x 62.0 width x 34.0 height
Features:
1.Two independent charging channels for 10440/16340/14500/14650/17500/17670/18350/18500/18650/18700 Li-ion battery
2.Algorithm(CC.CV)charging system
3.Optional and adjustable charge current:250mA,500mA,1A
4.VP1 with switchable LCD indicator to display the real-time charging voltage and battery status
5.Activation function for over discharging battery.VP1 can recover the overly dicharging protected batteries
6.Soft start function avoids damage from a large current surge
7.Automatically restart charging when batteries voltage(full charged batteries not taken out from the charger channel)is below 3.9V(batteries may self discharge)
8.Reverse-polarity protection circuit board Notice: The above-mentioned parameters tested in Lab are approximate and may vary between flashlight/charger, batteries and environments.
VP1 Package contents:
VP1 charger, Adaptor, Car adaptor, Manual, Warranty card
XTAR VP2
Feature:
*Three charging current options (0.25A/0.5A/1.0A)
*Three charging voltage options (3.2V/3.6V/3.8V)
*Charge for 10440/14500/14650/16340/17670/18350/18500/18650/18700/22650/25500/26650 3.0/3.2V, 3.6V/3.7V, 3.8V Li-ion batteries
*Low-Voltage, over-load and over-heat protection, power indication, stop supplying when low power
*LED status indications
*Real-time status display
*Adopts PWM technology to control the high efficiency DC-DC circuit, lower the voltage and reduce energy loss
*Three-stage charging and 0V battery activation
*USB Output (5.0V/1.0A)
*Adopts IC temperature monitor, avoid over heat
*Small charge current when start to charge
*Compact size, portable
*Reverse-polarity and short circuit protection circuit
XTAR VP2 12
XTAR VP4
Introduction:
XTAR VP4 is an intelligent four channels completely independent lithium ion LCD battery charger. Charging current can be adjusted automatically according to different channel, the user can also manually choose the current by the current switch button. The 120°angle high definition VA real time display, precision of battery cutting-off voltage, battery power indicators and optional currents, etc., whenever you know the battery charging status. If you want to buy a charger which is multislot, multi charger currents and can see charger status,VP4 charger will be your best option!
Features:
* Apply to four pcs 10440/16340/14500/14650/17670/18350/18500/18650/18700 or two pcs 22650/25500/26650 lithium batteries
* Compatible with IMR lithium battery
* Each channel is independent
* Three-stage charge algorithm(TC-CC-CV)
* Three charge current options (0.25 A, 0.5 A, and 1.0 A)
* Soft-start function, to avoid damage from large charge current while charging
* Automatically cut off when the battery is charged fully
* Precision cut-off voltage at 4.2V
* Compatible with small capacity battery
* Over heat protection
* LCD displays each battery real time statues
* Use high power intelligent step-down DC - DC circuit,greatly reduce the energy loss
* Built-in reverse-polarity and short-circuit protection circuit
* Use PC fireproof material for the shell
* OV activation function can wake up the over-discharged sleeping batteries
* 120°angle high definition VA screen to display the charging current,voltage and power indicator, you can see the charging status from any angle of view
* Certified by CE, RoHS
XTAR VC2
Introduction
In order to let more and more people are able to experience XTAR chargers and also help our distributors to earn more markets, we design a high performance charger VC2 with lowest price!
VC2 is the premium USB charger after MC series and also the first charger in the market which can tell you the real power of your battery!
Specification
| Input Power |
DC 5.0V 1.0A |
|---|
| Max Constant Charging Current |
500 ±50mA |
| Min Constant charging current |
150±50mA |
| Cut-off Voltage(Output Voltage) |
4.20V±0.05V |
| Auto Recharging Threshold Value Voltage |
3.9V±0.15V |
| Cut-off Current |
≤80mA |
| Working Temp |
0-40C |
| Net Weight |
109g |
| Dimensions |
L131*W66*H33mm
|
| Apply to |
Two 10440/14500/14650/16340/17500/17670/18350/18500/18650/ 18700/ 22650/25500/26650 3.6/3.7V Li-ion batteries
|
XTAR MC1 Plus
Introduction
The max charging current of XTAR MC1 Plus is 1A current. To fully charge a VTC5 just takes 3 hours. It can also automatically choose the most suitable charging current (0.5A, 1.0A) for your batteries to ensure the longest lifespan for your batteries. Just insert your battery in the charger and MC1 Plus will take care of the rest!
Specification
| Input |
DC 5.0V 1000mA |
|---|
| 0.5A Constant current |
500±50mA |
| 1.0A Constant current |
1000±80mA |
| Cut-off Voltage |
4.2V±0.05V |
| Apply to |
10440/14500/14650/16340/17335/17500/17670/18350/18490/18500/18650/18700/ 22650/ 25500/26650 3.6V/3.7V Li-ion batteries
|
User-friendly design
l Automatically choose the most suitable charging current (0.5A, 1.0A)
l Micro USB port compatible with any USB power and wall adaptors, good for travelling
l Automatically stop charging when complete and restart charging function, so you can keep the batteries inside the charger overnight
The safest charger
l 5V DC input, within the safety voltage ensures your safety
l Reverse - polarity and short circuit protection
l Durable fireproof shell with perfect heat dissipation and high temperature resistance
l Without temperature rising or overheating
Maximize the lifespan for your battery
l Precise cut off the voltage at 4.20V – Nothing less, nothing more.
l Use best charging method (TC-CC-CV) for Li-ion batteries
l Soft start can avoid sudden high current impact
Save your time and money
l To fully charge a VTC5 just takes 3 hours with 1A max real constant current
l Compatible with any USB power, no need to buy more wall adaptors
l A mini charger but can charge both 10440 and 26650 size battery, no need to buy many chargers
l 0V activation function can rescue your over-discharged batteries. Normally you need to throw away those over-discharged batteries, but with XTAR chargers you can rescue them and reuse them
Package Contents
1.100% Brand New
2. 1 x XTAR MC1 Plus Charger Official Standard
XTAR MC1
Features:
Reverse-polarity and shortcircuit protection circuit
Three-stage charging and 0V batteryactivation
Micro USB port to supply power for the charger. Solar panel(5.0V/0.5A) could be used as power supplier for MC1.
Adopts IC temperature monitor, avoid over heat
Small charge current when start to charge
Compact size, portable
Low heat design
Input 5.0V DC/500mA
Constant current output 500±50mA
Termination Voltage 4.20±0.05V
Termination Current <40mA
Apply to 10440/14500/14650/16340/17500/17670/18350/18500/18650/18700/ 22650/ 25500/26650 3.6V/3.7V Li-ion batteries
package including:
1xcharge
XTAR MC2
|
Features:
|
|
Reverse-polarity and shortcircuit protection circuit
Three-stage charging and 0V battery activation
Micro USB port to supply power for the charger
Adopts IC temperature monitor,avoid over heat
Small charge current when start to charge
Compact size, portable
Low heat design
- XTAR MC2 charger is a charger that exceeds your imagination. With quite light weight and ultra-compact size, it's been designed to be very solid and pragmatic. MC2 inherits all XTAR chargers' great features and derives its own incomparable characteristics
- Charge two batteries simultaneously and independently.
- Intelligently identify input power and automatically adjust suitable charge current(0.25A/1.0A).
- Applying to Micro USB interface for power supplying makes charging flexible and convenient.
- LED indicators do real-time display of battery state.
- Three-stage charge algorithm(TC-CC-CV).
- Charge two 14500 14650 16340 17500 17670 18350 18500 18650 18700 3.6V/3.7V Li-ion Batteries
- Over heat protection. When operate in high temperature, MC2 will automatically lower charge current to prevent over-heating burns.
- Built-in reverse-polarity and short-circuit protection circuit.
- 0V activation and soft-start function.
- MC2 has under voltage lockout and self-start function.
- Automatically stop when charge complete.
- ABS durable material.
|
|
Specifications:
|
- Brand: XTAR
- Charging qualifications and structures
- Input Power : 5.0V DC/1000mA
- CC Current : 500mA or 250mA
- Cut-Off Voltage: 4.20V
- Operation Temperature: 0-40 Celsius
- Weight: 95g
- Color: Black
- Package includes: 1 charger
|
XTAR VC4
Introduction:
XTAR VC4 is not only the upgraded version of both VC2 and XP4c chargers, but also the combination of our principle to keep making progress and taking the responsibility for the safety and environment protection. The VC4 can recognize/ display/ charge Ni-MH and Li-ion batteries at the same time and it also displays the charging current, battery voltage and charging capacity. The LCD backlight can be off or automatically into low light mode in 2min to save more energy.
Charger Parameter:
Lithium batteries charging parameter:
|
Input Power
|
DC 5.0V 2.1A
|
|
0.5A CC Current
|
500±50m A
|
|
1.0A CC Current
|
1000±80m A
|
|
Cut-off Voltage
|
4.20±0.05V
|
|
Operation Temperature
|
0-40C
|
Ni-MH batteries charging parameter:
|
Input Power
|
DC 5.0V 2.1A
|
|
0.5A Pulse Charging Current
|
500±50 mA
|
|
1.0A Pulse Charging Current
|
1000±80 mA
|
|
Cut-off Voltage
|
1.45±0.1V
|
|
Operation Temperature
|
0-40C
|
