Key Type

Touch key & password as Opening Types.

Set and change the password up to 4 to 19 digits.

Input the new password.
Up to 3 to 19 digits can be registered.

Setting auto/manual lock

Convenient function that is locking the door automatically after 1 seconds from closing the door.
-Setting on Auto mode : Open the battery cover

Press the access-code/touch key
registration button

Access-code/touch key registration button (Ding -dong-dang signal)
-Setting on Manual mode : Open the battery cover

Press the access-code/touch
key registration button

Access-code/touch key registration button (Ddang signal)

Setting : Access-code/touch key registration button

"8" Button

the time you want
(button "2" - "9" )

"*"

Indoor/Outdoor double locking system

-Outdoor double locking system (protection against burglars throgh milk hole)

If you set the outdoor double locking system, the door is not opened
even though the open/close button is pressed inside.

※ How to set on Press the button "#" of outer body for 5 seconds.

-Indoor double locking system
If you set the outdoor double locking system, the door is not opened even though the registered acess-code is pressed outside.

※ How to set on : Press the button "open/close"of inner body for 5 seconds.

Firealarm sensor(Built-in fire sensor)

The door is opened automatically in case that the fire sensor i s sensing the temperature(60˚±5)

Alarm sound over 90db in case of opening the door coercively.

Protection against burglars (Alarm function)

This function is for protecting against burglars, an emergency alarm comes out for a minute if someone tries to open/close the door compulsory from outside.
* If you press the access-code or touch key, the alarm will be off.

How to open the door with emergency battery

You can open the door with emergency battery when the battery is discharged. Contact any DC 9V alkaline battery to the emergency terminal of outer body, you can use the access-code or touch key.

Category		Description
Basic	Model	Harmony
	Use of password	4-19 digits
	Number of touch key to be registered	50ea or less (touch key applied model)
	Door thickness	35 ~ 50 mm
Size	Outdoor body	64 (W) X 165 (H) X 22 (D)mm
Size	Indoor body	96.4 (W) X 163 (H) X 38 (D)mm
Material	Outdoor body	AL, ZN, PC
Material	Indoor body	AL, ZN ABS
Power	Surface treatment	Triple metallic coating treatment
	Working power	6V( Alkaline battry1.5V 4pcs,AA Size)
	Emergency power (regardless of polarity)	9V rectangular alkaline battery (separately pulthased)

Symptom	Troubleshooting
The password Is not memorized.	Use the tooch key to open the door. and input the new password. If the card key is not input or lost. contact A/S center.
The touch key Is not reglstered.	Use the password to open the door. When the password is not memorized, contact A/S center.
There are 5 times errors of the password.	In case of 5 times errors. all operations are stopped for aboot 1minute. Wait during the given time and then input the password or the touch key again from first.
The door Is not automatically locked.	Check that the auto lock function is set to Auto mode.
WIlen pressing "*" button, the machine does not work.	If other function do not work as well. check that batteries are normally inserted. If the batteries are used up, replace then by new spares.
External button tone and the lampdo not work.	Check that there is any fluid leakage in the battery case or the machine. If is so, clean contact portions with a dry cloth.

Picture

Function Help

Open the battery cover in the indoor body.

Press Password/Touch Key Input button.
Beep sound will occur.

Input the new password
Up to 3 to 19 digits can be registered.

Press "*" button to complete the registration. "Ding-dong"
soond will occur to inform you of successful input.

* To go to the next stage, perform it before the lamp turns off (within 15 seconds).

* Register the password with the same method as specified above.
* When the new password is registered, the existing password is automatically deleted.

* Never fail to register and change the password with the door opened.
* The password is set to "1234" at the factory.
* After installation, necessarily change it before use.

Picture

Function Help

Open the battery cover in the indoor body.

Press Password/Touch Key Input button.
Beep sound will occur.

Contact each touch key to be registered to the external input
part to the machine. Up to 1 to 50 keys can be registered.

Press "#" button to complete the registration. "Ding-dong" for
success / "Beep" sound for failure will occur.

Picture

Function Help

Open the battery cover in the indoor body,
and press Password / Touch Key Input button one time.

Two times press ·0" button in the password touch board in the
outdoor body.

Press "*" button to complete the deletion.

* When the card key is deleted. existing registered card keys are completey ldeleted. Then,. newly register touch keys to be used.

No	Picture	Function Help
1		Raise the external cover. ("Beep" sound occurs and the digit board lights on.)
2		Enter the input password.
3		Down the external cover or press "*" button. and the door will be opened.

* In case five times errors of the password. the machine does not work for 1minute.
* When the machine has not worked, you should use it in one minute.

No	Picture	Function Help
1		Contact the registered touch key to the touch key input part in the outdoor body. "Ding-dong" sound will occur and the door will be opened.

Picture

Function Help

You can easily open with handle operated inside the body under locking condition.(panic function)

1. Auto mode

No	Picture	Function Help
1		Close the door, and it will be automatically locked in one second.

2. Manual mode

No	Picture	Function Help
1		Raise the external cover or press "#" button.

1. Auto mode

No	Picture	Function Help
1		Close the door, and it will be automatically locked in one second.

2. Manual mode

Picture

Function Help

The door is lockoo manually by turning hand-operated locking device.

No	Picture	Function Help
1		Easy function to lock the door automatically In one second after closing it. - Auto mode: Press Password/Touch Key Input button once "#" button Password/Touch Kef Input button ooce("ding-dong.dang"sound) - Manual mode: Press Password/Touch Kef Input button once "#" button Password/Touch Key Input button once("beep"sound) Auto lock lime Is changeable up to 2 to 9 seconds. - Press Password/Touch Key Input Button "8" button desired times ("2"~"9" buttons) "*" button.

Indoor Dual Lock Fuction

No	Picture	Function Help
1		Internal dual lock When setting the dual lock function(red) in the indoor body with the door closed, the door does not open although the password or touch keys are used from the outdoor.

Outdoor Dual Lock Fuction

No	Picture	Function Help
1		External dual lock When the external dual lock is set, the door does not open spite of pressing Open / Cloes button from the indoor. - press "#" button in the outdoor body during 5 seconds, and the dual lock function will be set.

No	Picture	Function Help
1		Password exposure-proof function By adding the dummy number function, remove a risk of password exposure. How to use the dummy number function Before inputting passwords. press random digit buttons without limitation and then input the password. and the password will be concealed.

No	Picture	Function Help
1		When the door is not closed normally, the machine will try to open the door three times and then "Beep" sound will occur to inform you of an error.

No	Picture	Function Help
1		When the door is forcedly opened from the outdoor, the emergency alarm sound will occur for 1minute and inform you of the entrance of outsiders. * Input the password or the touch key. and the alarm will be released.

No	Picture	Function Help
1		Press Internal Password/Touch Key Input button "1" and "3" button "" button "1" button serveral times for small sound and "3" button serveral times for loud sound "" button

No	Picture	Function Help
1		When the thermal detection sensor detects heat (60℃±5℃)the door will be automatically opened.

Picture

Function Help

If the built-in battery voltage gets downed. the lamp blinks before 7 days and asaved melody rines. You should replace all of them by new spares.

* If new batteries are used together with used ones, their life cannot be guaranteed and the machine may not work normally.
* Use gtnuine alkaline batteries only. If rechargeable batteries are used,the machine may not work normally.

Picture

Function Help

Open the bettery cover in the indoor body and then replace all of batteries by new spares. The password or touch key registered are not changed in spite of the exchange of batteries.

* Check battery polarity (+/-) before insertion.
* Abnormal insertion results in error-working
* If any defect occurs due to the use of bad batteries, it is attributable to the customer. Use genuine alkaline batteries only.

Picture

Function Help

When batteries are completely dischargro due to long·time going out or traveling. you can open the door with safety using the emergency power terminal.

Purchase a DC 9V rectangular alkaline battery in the market, contact it to the emergency power terminal in the outdoor body and use the password or the touch key to open the door.

Neier fail to use this fuoction on condition that the battery contacts to the emergency power terminal. (Regardless of the polarity (+/-)

No	Picture	Function Help
1		Contact 9V batlery to the emefgeocy power terminal.
2		Press "*" button and then the password.
3		press "*" button again, and the door will be opened.

* Contact a 9V battery to the emergency power terminal and then contact the touch key to the touch key input part, and the door will be opened.