alt
alt
alt

Injection molding and plastic rain rain gear. What is the difference

Injection molding plastic rain rain gear.

The production process

Used Japanese imports of technology， using high precision plastic mold processing of large injection molding machine and the production efficiency is high， the product size， precise and delicate， mounted to the vehicle lines perfect， fit body.

Generally use the manual wood or plaster mold， the acrylic sheet heating，drying after soft molding， manual operation in the whole process. Productsize error is bigger， each product is not uniform size， is very difficult to fit the body.

Product material

Using a new Japanese imported acrylic (PMMA) disposable particles， this product has high transparency， high hardness， strong impact resistance，not easy to aging etc.

General by acrylic sheet repeatedly regeneration. The computer 3D design of injection products， large CNC machining precision mould， the productionof rain gear lines smooth， fluent appearance， light transparent， not stopdriving line of sight.

Product special， by the designer according to the design of each vehicleand.

Plastic rain gear with injection molding injection molding appearanceappearance cannot be compared， lines and colors are no appearance ofinjection molding products. Plastic rain gear with injection molding injection molding appearance appearance cannot be compared， lines and colors areno appearance of injection molding products.

The quality of the products

Thickness of plastic rain gear from 2.5mm to 4.5mm， high hardness， verysuitable for installation on the window， durable.

Thickness of plastic rain gear from 2.5mm to 4.5mm， high hardness， verysuitable for installation on the window， durable. In addition with metal buckle，no drilling， let the rain gear up stronger and more secure， effectively reducing the noises produced automobile at high speed.

Sheet plastic rain gear 1.3mm to 1.7mm pressed. This kind of product thin material， resulting in the wind noise larger cars; and recy

With the installation instructions

1， imported acrylic material， and elemental carbon plate.

2， with clarity， high temperature resistance， impact resistance， bending resistance， no color characteristics.

3， made of high precision computer professional machines， to ensure compliance with the car specifications.

Streamlined design， perfect 4， considering the car reduced in the drivingwind cutting noise.

Product effect:

3， the dazzling glare and ultraviolet shielding side， reducing the temperature inside the car， can shelter from the rain and snow in the car， do not affect the foreign exchange of air.

4， with the body shape design of integrated， unified and perfect body line，be good to hear or see.

5， even if the rain can also free ventilation， make the car more comfortable，unique.

The installation of the product:

1， the glue surface must maintain the absolute dry cleaning， general cleaning available without fibre shedding cloth dipped in 50% alcohol，isopropyl alcohol， acetone or toluene solution to scrub， after surface solventcleaning solvent shall be played only after a thorough pasting;

2 products paste， paste before the products shall be required to install the product on the site to adjust， to determine the location of product installation， and then tore off the red film paste. The operation should avoidfinger contact with the rubber surface， you should use the beat， so as to ensure the full contact adhesive and wetting.

Towel or cloth rubbing sticky glue position! Don't dip in water within 36 hours after sticking! Don't speed， to ensure that the viscous give full play to the role of.

(if the weather is cold place can roast gun blowing double-sided adhesive，3M adhesive glue to ensure the performance of normal play， hairdryer orsuch effect更佳。）