Descriptions:
Large LCD display
Zero setting at any position
Metric/Inch system interchange
Manual power on/off
Suitable for tread depth， brake shoe and pad wear

Specifications:
  1. Range: 0-25.4mm/ 0-1"
  2. Resolution: 0.01mm/ .0005"
  3. Working temp. : 0-40°C
  4. Battery: Sr44/LR44， 1.5V
  5. Size: Approx 11 x 6 x 1.2 cm
How to use:
  1. Insert battery in (2)，+pole upward
  2. Switch ON (4)
  3. Put base(5) on flat surface and press bar(1) downward
  4. Set ZERO(3)
  5. Put gauge on tyre， hold stable and press bar tip(6) into tyre profile
  6. Read profile depth value directly
  7. Switch OFF(4) OR continue
Important:
  1. Keep the gauge clear
  2. No water oil on bar(1)
  3. Remove battery when not used for long periods
  4. Display flashes when battery power is low
  5. Accidental display failure: take out battery for 30 seconds
Package includes:
1 X   Digital Tread Depth Gauge