♬Come with the Adjustable Suspension Scissor Arm Stand with 【better weight capacity Approx. 70.5oz /2KG】, its durable steel construction with 【Double-braced arms】, provides a strengthened sturdy support. With 【360 degree flexible adjustable connector】, it gets you the most desired angle and height for recording.
♬Trouble-free even if your PC is with damaged audio sound card or single audio port. The 【Bonus Double audio port USB Audio Adapter】allows you to connect the Microphone and the earphone to the PC via the USB interface. 【Note: Sound might be lower and lighter and it is recommended that you connect the Microphone to the electrical outlet or use a 48V phantom power supply at the same time. 】
♬The kit is【Windows and Mac OS system compatible】, it comes with all the necessaries: 1x Condenser Microphone // 1x Adjustable Suspension Scissor Arm Stand // 1x Table Mounting Clamp // 1x Anti-shock Mount // 1x Pop Filter // 1x Ball-type Anti-wind Foam Cap // 1x 3.5mm Male to XLR Female Cable. 【Extra accessories：1x XLR Male to XLR female Cable for Phantom Power Supply // 1x Microphone Clamp and 1x USB Audio Adapter】【NOTE: Mac Incompatible】
♬Designed for meeting the standard of highly-critical studio recording, it features【cardioid pick-up pattern】, it can eliminate background noise and isolate the main sound source, making it recordable. With 2 different cables to adapt to different recording interfaces:【The built-in XLR male to XLR female cable】, it allows you to connect to the Phantom Power Supply to get a clearer and higher sound while the 【3.5mm Male to XLR Female Cable】, make it easy for you to connect to your PC, or mixer.
♬Add-on accessories:【1.6'' diameter Anti-shock Mount with locking knob】effectively reduces handling noise; Compatible with varies of microphone stands, it is a must for radio broadcasting studio, voice-over sound studio; And【Ball-type Anti-wind Foam Cap】 eliminates wind noise, pops, and singers'' spit; 【Wind Screen Pop Filter Mask Shield】with Double-layer nylon mesh construction reduces plosive Pops in recording; 【Bonus Microphone Clamp】of 27 mm in diameter, it fits most types of microphones.

Technical Details

Product Details

Product Dimensions

Package Dimensions
Width : 9.49 inch
Height : 5 inch
Length : 16.18 inch

Item Weight: 5 pounds (View shipping rates and policies)
Shipping Weight: 4.25 pounds (View shipping rates and policies)

ASIN : B06Y2BP28V

Product Description

NOTE:

1. The Condenser Microphone only works with the device with enough power (5V Voltage required)
When connected with desktop computer, the Microphone could be used alone;

When connected with laptop computer, please connect the laptop to electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough.

2. No enough power provided (when used with Amplifier or Mixer, etc.), the sound volume recorded might be low, please use an extra 48V phantom power adapter to connect it.

3. The microphone can not be used with mobile phone and tablet computer
4. If better sound prefered, the sound card will be needed.

5. When recording, please put the microphone away from the amplifier to prevent recording noise due to amplifier.

6. This condenser microphone set can work with windows and Mac OS system,It cannot work with Mac.

Specification:
Polar Pattern: Undirectional
Signal Noise: 78dB
Electrical Current: 3mA
Equivalent Noise: 16dBA
Sensitivity: -38dB ± 2dB
Frequency Response: 20Hz-16kHz
Load Impedance: ≥1000Ω
Microphone Output Interface: 3.5mm
Output Impedance: 150Ω ±30%
XLR Cable Length: 2.5m
Desk Clamp Max. Mount Thicknessl: 45mm
Max. Length of Pop Filter''s Gooseneck: 370mm
Bonus Microphone Clamp fits Microphone Dia.: 27mm
Anti-shock Mount & Microphone Stand Material: Metal
Microphone Material: Steel+Zinc Alloy

Package:
1x Condenser Microphone
1x Microphone Stand
1x Anti-shock Mount
1x Pop Filter
1x Foam Cap
1x Table Mounting Clamp
1x 3.5mm to XLR Cable
1x XLR Male to female Cable
1x Microphone Clamp
1x USB Audio Adapter