If you are the first paste glue products strongly recommended to read the following after the installation of Oh, veteran skip......

Don't try to paste in a plush, leather and other easy to loose material,

Two paste before don't touch has been tearing protective film clip double-sided adhesivebase, hand pressure several minutes in this process do not shake the buckle or unplug the re paste to use good paste (because the double-sided adhesive paste effect will be50% down)

Three do not use any chemical cleaning agent cleaning dashboard paste, such asasphalt cleaner, foam cleanser, dashboard wax etc. because these and double-sided adhesive conflict. The correct way is to use a towel sticky point clear water clean and wipe dry after can (must be dry well water is not sticky)

Four paste good after leave, don't go and have a look of curiosity driven tight, so destined to fall off easily, because the double-sided adhesive generally need 3-7 genius canachieve maximum viscosity and stable

Five usually instrument maintenance Note, don't let the chemical spray cleaning agents directly with the buckle or towel hanging

Six cold weather and recommend the use of air heated to about 40 degrees to the double-sided adhesive paste is better (technology can use lighter Oh, but to control the time and don't burn or paste)

Material plastic bottom with double-sided adhesive

The size of the largest popular point can be clamped ordinary mouse line size

Professional dimensions as shown below