• Specially designed to meet the needs for the production of high-grade batteries (nickel-cadmium, nickel-hydrogen, lithium batteries);
• Single-chip microprocessor control is adopted to ensure higher stability and reliabilities in performance;
• Compact, lightweight and attractive in appearance;
• Attractive welding spots, small sparks, causing no blackening, stable welding current, even welding spots;
• Fully eliminates the phenomenon of low voltage and moisture oozing after spot welding on lithium batteries and serves as ideal equipment for the production of assembled batteries;
• Single-chip microcomputer control is adopted to achieve dual-pulse welding;
• Digital setup for various parameters, making parameter regulation visual and accurate;
• The pressure of the two welding needles is independently and thus conveniently regulated to ensure stable and reliable welding pressure;

• 2pcs 25A Fuse 
• ​20pcs Nickel Sheet (0.1 * 3 * 100 mm)
• 2 butts of Welding Needle
• 1pcs Plug Converter (If the original plug of the machine is the same to your country's, the plug converter will not be supplied.)

Welding/Soldering Machine 

First, the working principle

Precision microcomputer spot welding system using the principle of double-sided double-point overcurrent welding, work pressure the two electrodes so that two metal workpieces a certain contact resistance under the pressure of the two electrodes, and the welding current from flowing through the other electrode When an electrode is formed in two point contact resistance instantaneous heat welding, and welding current flow from the moment the two other electrode along the work piece to this electrode to form a loop, without damaging the internal structure of welders member.

Second, characteristics:

This machine is on the top AC pulse dual-little welder, has the following features:

1, lightweight appearance.

2, welding traces beautiful, small spark, no black (the battery will not sag phenomenon, due to the flowing liquid after spot welding), completely overcome lithium battery spot welding low pressure and water phenomenon appears, your battery is ideal for production and assembly .

3, the control circuit using SCR discharge pulse circuits and digital program control circuit. Setting the parameters are digital, so intuitive and accurate parameter adjustment.

4, the pressure welding needle and two needle distance can be adjusted independently and easily adjusted to ensure the welding pressure is stable and reliable.

5, welding switch is the only use of photoelectric switches.

6, the unique fault test function, can self-diagnose overhaul.

Third, the scope

1, various types of rechargeable batteries and nickel plate 0.03mm-0.15mm connection 2, stainless steel cutlery external fittings combine buckle 4. Welding

Fourth, the main technical parameters

1, input power: AC 220V ± 10% 50Hz ± 2Hz

2, rated power: 3KVA

3, welding current: 0-40

4, electrode travel: 30mm

5, the control mode: double pulse

6. Package weight: about 6KG

7, Dimension: L260 × W160 × H200 (mm)

8, Suitable for: for the 0.03mm-0.15mm nickel plate or nickel belt or steel

Safe use and maintenance

1. welder grounded.
2. The two electrodes can not be short-circuited.
3. test welding energy should be small to large.

The power plug should ensure welder POWER in the closed state.

5. Keep the electrode clean.
6. Unplug the power supply when unused for long periods.
7. The electrode can not be put together before the start

一、 工作原理
微电脑精密点焊机系采用双面双点过流焊接的原理，工作时两个电极加压工件使两层金属在两电极的压力下形成一定的接触电阻，而焊接电流从一电极流经另一电极时在两接触电阻点形成瞬间的热熔接，且焊接电流瞬间从另一电极沿两工件流至此电极形成回路，不伤及被焊工件的内部结构。
二、 特点：
本机为上顶式交流脉冲双点点焊机，具有以下几大特点：
1、 外形美观轻巧。
2、 焊接痕迹美观，火花小，无发黑（电池不会因点焊后出现凹陷、流液的现象），完全克服锂电池点焊后出现低压和出水现象，是您生产组装电池的理想设备。
3、 控制电路采用可控硅放电的脉冲电路和数字程序控制电路。各项参数 均为数码化设置，因而参数调节直观准确。
4、 焊针的压力和两针的距离可独立调节，且调节方便，确保焊接压力稳定可靠。
5、 焊接开关是国内唯一采用的光电开关。
6、 独特的故障测试功能,可以自我诊断检修.
三、 适用范围
1、各类充电电池与0.03mm-0.15mm镍片连接 2、不锈钢餐具外围配件结合4.表带扣的焊接
四、 主要技术参数
1、 输入电源：AC 220V±10% 50Hz±2Hz
2、 额定功率：3KVA
3、 焊接电流：0-40
4、 电极行程：30mm
5、 控制方式：双脉冲
6、 包装重量：约6KG
7、 外形尺寸：L260×W160×H200（mm）
8、 适用对象：用于0.03mm-0.15mm镍片或镍带或者钢片
安全使用及维护
1.焊接机可靠接地。
2.两电极不能短路。
3.试焊时，能量应由小到大。
4.插拔电源插头应确保焊机POWER在关闭状态。
5.保持电极清洁。
6.长期不用时应拔掉电源。
7.开机前电极不能放在一起