
About This Product
Digital TDS Meter electronically tests the TDS (Total Solids Dissolved) level of water, which makes sure you, your pets, and your family are getting the maximum benefits from water. The lower the TDS level is, the purer the water is. The unit could provide 1000 hours of continuous usage, is ideal for using in the following situations: drinking water, water filters, hydroponics, aquariums, food & coffee, pools & spas. Keep your water safer, keep your life better!
Specification
- Main features:
- Measure total dissolved solids in water, compare water samples.
- Know when you need to change the water or filters.
- Slim line pen-style design, easy to use and store.
- LCD display, easy-to-read screen.
- Highly convenient, efficient and accurate.
- With a belt clip at the TDS tester back, easy to carry.
- Applications: drinking water, water filters, hydroponics, aquariums, food & coffee, pools & spas.
- Product Specifications:
- Range: 0-9990 ppm ( mg/L )
- Resolution: 1 ppm ( 0~999 ppm )
- Accuracy: +/- 2% Full Scale
- Calibration: Factory Calibrated
- Auto Shut-off: 10 Minutes
- Temperature Compensation: Automatic
- Operating Temperature: 0℃ to 50℃ ( 32 F to 122 F )
- Power source: 2 x 1.5 V (button cell) included!
- size: 142 x 25 x 15 mm
- How Pure is Your Water?
1. 0-50ppm = ideal drinking water
2. 50-100ppm = carbon filters, springs
3. 100-200ppm = hard water
4. 200-400ppm = average tap water, etc.
- Approved: CE / FCC
Accessories:
1 x Protective Case
Operational Guidance:
- Remove the protective cap.
- Press the ON / OFF button once out of the water.
- Immerse the tester into the water no more than 2 inches.
- Wait for the display to stabilize. The tester automatically compensates for temperatures variations Once the readout stabilizes ( 10-30s), press the Hold button to view out of the water.
- Press the ON / OFF button again to turn off the tester. Th ester will shut off automatically after 10 minutes of non-use.
- After usage, shake off the water from your tester or wipe it with a tissue.
- NOTE: If the tester displays a flashing " X10 " icon, multiply the reading by 10.
- Important: Do not drop the entire tester in the water or dip beyond the maximum 2" level. This product is not waterproof. Tester is not meant to be used in hot water.




