RGB LED Strip Connector Kit 4 Pin With Extension Wire UL Listed 9.8 Feet/3 Meter 22 Gauge 4 Conductor, DIY Both Strip to Power Lead and Strip to Strip Jumper, Waterproof Use. 5 Connector Packed.









For 10mm-3528 NON-WATERPROOF 10mm


For 10mm-3528 NON-WATERPROOF 8mm


For 10mm-RGB NON-WATERPROOF 10mm


For 8 mm-3528 WATERPROOF 8mm


For 10mm-5050 NON-WATERPROOF 10mm


For 10mm-5050 WATERPROOF 10mm

Product Description

1.Package Include

5 PCS RGB LED Strip Connector Terminal 10mm 4 Pin Waterproof
9.84 Feet / 3 Meter 22 Gauge 4 Conductor Extension Wire UL Listed

2.Special Benefit you can get with it.

Connect waterproof strip light without removing its surface glue coating. Save your time.

You will be no more limited by distance between strip light to Controller or dimmer. This connector allow you to cut any length wire according to project's actual requirement, then attach wire to connector easily without stripping insulation.

With 2 connector and a wire, you are able to diy a strip-to-strip-jumper wire in order to extend strip light with any angle or direction. The length of this jumper wire can be decided by you fully.

No more worry strip light moving out of connector, the connector's teeth will pierce and grip the PCB tightly.

3.Tools needed to use

A pliers only

4.How to use (2 mode)

4-1 How to make a Strip-To-Strip-Bridge connector ?

  1. Cut a wire for the length you want
  2. Insert wire into connector's wire end
  3. Clamp cap down
  4. repeat step 1-3 to add another connector to the wire

4-2 How to make a Strip-To-Controller connector

  1. Cut a wire for the length you want
  2. Insert wire into connector's wire end
  3. Clamp cap down
5.Technical Data

Working Voltage: <=24V
Max Current of Pin: 5A
Pin Quantity: 4 pin
Workable Strip Light Width: 10mm
Workable PCB Thickness:0.2~0.35 mm
Working Ambient TEMP.: -20~50℃
Heat Resistance:105℃


Feature

Applicable for SMD5050 RGB waterproof strip light in different LED density ranging 30~90 LEDs per meter.And workable to strip light with 3M foam VHB red adhesive tape.
Include RGB Strip Light Connector and Wire,allow you to DIY both strip-to-strip-bridge and strip-to-controller connector wire that is up to 3 meter / 9.8 Feet long,no more worry about distance between strip light to controller or dimmer
Its Clear Cap will not mask light of first LED and will not leave dark area in your lighting space.Really make your lighting effect uniform
No need stripping wire before connection, really allow user to insert & press to connect with a 'CLICK'sound. Connect your led strip to RGB controller or dimmer without any soldering, just a pliers needed.
Innovative fixing bar and piercing contact design will make connector grip strip light tightly,never worry strip light or wire moving out of connector.
Brand : nicelux
Item model num : NLCDJN10XB4W3
MPN(PartNumber) : QJ-DJ-N10XB-4
EAN : 0710619657891
Product Dimensions(LxWxH) : 20x12x3cm ; 18 g
Package Dimensions(LxWxH) : 12x9x3cm ; 18 g
Attention for order international goodsAll items are delivered from oversea(USA,KOREA,JAPAN,Malaysia)DirectlyDelivery would be done local shipping company in country of Production Place and Qxpress or POST in singaporeTotal shipping takes 7~14 working daysThe item from the third country could take 2 week more than normal delivery in transitNo exchange or Return is Allowed because of simple mind change Such Return or exchange is ly allowed for the reason below Major defect is discovered Wrong item is Delivered If you want to retunr or exchage at you cost, kindly Contact us via email Please check when you return the item just for changing your mind, you could be charge return cost (orginal + return shipping , duty, and etc) You should let us know within 7 days from the date you received the item if you'd like to get a refund for the item About Votage of electronics The voltage of most electronics goods listed on our shop is 110V Need transfomer to use US electronics We cannot accept return for dameged electronic item because of not using transfomer