| |
Useful Information | About the product Aztech 300Mbps Wall-plugged Wireless-N Repeater, WL559E enables users to gain Wi-Fi access freely environment by picking up existing wireless signals from router or access point and bouncing off to other areas that experience unstable or inconsistent wireless coverage. The sleek and elegant design seamlessly integrates into any home environment without the sight of messy wiring or cabling. Wi-Fi Repeater in Any Wall Outlet at Home or Office Aztech WL559E is the latest Wi-Fi repeater model that follows WL556E, the first Wi-Fi repeater designed with an in-built power adapter. Unlike Wi-Fi repeaters that require an external power supply adapter, the innovative wall-plugged design empowers users to plug it directly into any available power outlet. Robust 300Mbps Wireless-N Speed 300Mbps Wireless-N speed ensures faster wireless connection between devices. MIMO technology provides better overall coverage against weak Wi-Fi or Wi-Fi dead spots and enables users to stream multiple HD content wirelessly from Internet-enabled TVs, game consoles and media players without lag. Intelligent LED Indicators Received Signal Strength Indicators (RSSI) are LED indicators that intelligently determine the wireless signal strength received from the router. By reading the number of illuminated LED indicators, users can assess if the area that Aztech WL559E is plugged into is the recommended location for best Wi-Fi coverage. For example: A single illuminated LED indicates that the area where Aztech WL559E is plugged into has weak Wi-Fi coverage. The user should then plug the Wi-Fi repeater to another available wall outlet. Two LED indicators show recommended Wi-Fi coverage while three LED indicators suggest excellent coverage. 
Wi-Fi Protected Setup (WPS) Button for Fast and Easy Installation Users can automatically add Aztech WL559E to their existing network by pressing the WPS button located at the top of the product. Simply press the WPS button for approximately 5 seconds and within a span of 2 minutes, press the router's WPS button for 2 seconds. An intuitive web interface allows a step-by-step guide in the set-up process. 
|
|
Aztech WL559E is a Wall-Plugged 300Mbps Wireless-N Range Repeater, which supports wireless 802.11b/g/n, and one 10/100 Base-T Ethernet port.
WL559E supports robust 802.11n technology with up to 300Mbps data transfer rate. The extender can take an existing 802.11n wireless signal, repeat and extend it to a longer range where it is too far away for the router or access point to reach. It eliminates the cable wires while providing the same reliable network connection. It can repeat and extend the wireless signal from virtually any 802.11n wireless router or access point that is launched on the market. It is backwards compatible with the 802.11b/g router or access point.
Make Wired Network WiFi Ready
The repeater is equipped with 1 x 10/100M Auto MDI/MDIx LAN port that can be used to connect to an existing wired network to serve as a wireless interface. It can also be used to configure the repeater via its web-based GUI, or upgrade the firmware.
MIMO Technology
The device is designed with MIMO technology, which successfully reduces 'dead spot', and extends network coverage within a home or in the building.
Advanced Security
WL559E features with 64/128-bit WEP encryption and WIFI Protected Access (WPA), WPA2 to ensure the network security and prevent unauthorized access to you network.
Portable without the Need of External Power Supply
The device is easy to setup. It is portable with no need of any external power adaptor. It comes with the embedded power supply and power plug, so that users can just plug the device into a power socket.
Product Features:
- Supports ratified 802.11n technology with the data transfer rate up to 300Mbps.
- Repeats existing wireless signal to areas where the router or access point is not able to reach.
- Shares large files, printing and storage quickly and reliably in wider range in your home or office.
- Eliminates the use of cable wires while providing reliable wireless connection.
- Enables wired network wireless ready through the LAN port
- MIMO technology to reduce "dead spot" and increase network coverage.
- WEP, WPA, and WPA2 to ensure network security from unauthorized access.
- User-friendly web-based GUI and easy hardware setup. No need of external power adaptor
- Support WPS to both router and client device
PRODUCT SPECIFICATIONS
| Protocol/Standards/Support |
|
- Wireless IE EE802.11b/g/n
- Ethernet IEEE 802.3 10/100, IEEE802.3u, IEEE802.3ab
|
|
- OFDM 1024/256/64/16/8 QAM, QPSK, BPSK and ROBO Modulation Scheme Wireless
- IEEE802.11n: BPSK, QPSK, QAM-16, QAM-64
- IEEE802.11g: BPSK, QPSK, QAM-16, QAM-64
- IEEE802.11b: CCK, QPSK, BPSK
|
|
- Europe (ETSI): 2.412GHz ~ 2.742GHz (CH1 ~ CH13)
|
|
- Wireless: 64/128-bit WEP, WPA, WPA2
|
|
- Key Chipset: Ralink RT3352 Network Processor + WLAN Controller
- SPI FlashRom: 4M Byte (Default)
- DDR2 DRAM: 64M Byte
|
|
- OS Independent with TCP/IP protocol installed
|
|
- Supply voltage range: 100VAC – 240VAC (50/60 Hz)
- Power Consumption : Less than 4W
- Max Current : 0.12A
|
|
- 1 x RJ45 for 10/100Base-T LAN
- 1 x Factory Default Reset Button
- 1 x WPS button
- 2 x Internal antennas
|
|
- 105(L) x 58 (W) x 42 (H) mm
|
|
|
|
- Operating : 0 o to 40 o Celsius(32 o to 104 o Fahrenheit)
- Non-Operating :-25 o to 70 o Celsius(-13 o to 158 o Fahrenheit)
|
|
- Operating : 30% to 90% Relative Humidity (Non-Condensing)
- Non-Operating : 30% to 95% Relative Humidity (Non-Condensing)
|
NOTE : Specifications subject to change without prior notice.
Authenticity Guaranteed: We Guarantee that all items are 100% OR your money back
Come with Full New Standard Package
*2 Year Distributor Limited Warranty & Full Manufacturer Warranty*