• Rubber‑like
• Very Soft
• Shore A ~92
• Elongation at yield of about 600%
• Highly abrasion resistant
• Hydrolysis resistant
• Resistant to microbes
• Skin friendly

Nominal diameter	2.85 mm
Warp	high
Flexibility	very high
Break resistance	no break
Printing temperature	~ 210-240 °C
Temperature resistance	up to ~ 70 °C

Tips&Tricks

We recommend to print soft materials very slow, at 15-45 mm/s. The printing bed has not to be heated and the object should be cooled. The filament needs to be guided very well between feed wheel and nozzle, so that the filament does not bend.

TIP!
TPU is best pre-dried. For example, in an oven at about 80 °C for 2-4 hours.


Applications
Drive belts, profiles, shoes or shoe soles, objects with soft touch, such as cell phone cases.

Due to all the different types of hot-end it's extremely difficult to give a temperature advice. Please consider these tips, provided by the manufacturer, as a starting point to find the temperatures that work well in your setup. You may have to adjust the temperature settings slightly based on your type of printer.