UD原装正品丝系列(A1 ,不锈钢,Ni80)

备注：亲，如您未购买过类似产品，下单之前请过一眼以下常见问题。

UD 发热丝规格参数表

  发热丝常见问题

关于材质：市场上常见的发热丝按材质区分主要要铁铬丝、镍铬丝、钛丝、316L不锈钢丝四种在所有发热丝中，康泰尔A1丝最为普遍，以钛丝和316L不锈钢丝的性能最安全，镍丝应用最为普遍成熟。追求安全性第一的可以选择钛丝，追求口感极致的可以选择镍丝，如果而这要求都非常高，而且使用的优势最新的控制芯片的话，可以考虑316L不锈钢丝。避免了镍丝生成的羰基镍，也避免了钛丝的呛人口感，目另外由于材质不同，绕丝的技巧也不同，钛丝、316L不锈钢丝可以密绕，而镍丝则只能松绕，镍丝不能烧红淬火定型，而钛丝和316L不锈钢丝则可以。

关于规格：每种材质的发热丝都是有不同的规格，不同的规格直径（粗细）不一样。

关于积碳：烟油里的香精成分被蒸发了肯定要形成积碳，不同的烟油产生积碳的速率不同。积碳严重时，将棉花抽出，点火进行烧丝，将发热丝表面的积碳高温去除，用清水擦拭或冲洗线圈表面，便恢复光泽，可以塞入棉花继续使用了。建议一个线圈最多使用两次烧丝清洁后就得丢弃了。

关于烧丝：我们知道发热丝就是一种加热元器件，通过电池供电发热，使其旁边的烟油挥发，形成烟雾，从而让人吸的时候达到“吞云吐雾”的效果。DIY绕丝的过程中，线圈之间会存在一定的缝隙，而烧丝的一个过程可以让我们将线圈定型，避免跳阻的基础上，调整发热丝的发热均匀，通过高温的情况下在线圈表面产生氧化物，避免发生局部短路。也为了去除在生产过程中沾染上的杂质与灰尘。

注意：这里所讲述的烧丝是针对功率模式使用下的普通A1丝或花式丝。温控模式下镍、钛发热丝不需要进行烧丝操作。但316不锈钢发热丝比较特殊，可功率可温控，如在功率模式下需进行烧丝操作，在温度模式使用可不进行烧丝操作。

小提示：进行烧丝时，还没开始变红会先冒起一缕青烟，这一缕青烟正是在高温中，发热丝表面的产生氧化物或灰尘被清除的产生的烟雾，闻起来感觉像是烧焦的味道。

烧丝与不烧丝有什么区别：烧丝前，线圈的发热不均匀，局部区域发热程度不同。烧丝后，发热均匀，发热程度一致。不烧丝的情况下加入棉花添加烟油进行点火操作，发现烟雾表现出稀疏不均匀状，拆下棉花后发现，处于线圈区域下的棉花有局部变得深沉，有烧糊的现象，烟雾进入口中，会有很烈的烧焦异味。

烧丝后塞入棉花添加烟油进行点火操作，烟雾的表现处浓郁、均匀的散发状，抽出棉花后，发现处于线圈区域下的棉花颜色并没有变深色的迹象，没有烧糊的情况发生




Hot wire common problems

On the material: the market common hot wire by material to distinguish between the main iron chrome wire, nickel chrome wire, titanium wire, 316L stainless steel wire four in all the heating wire, the most common in the heart, the titanium wire and 316L stainless steel wire The most secure, nickel wire application is the most common maturity. The pursuit of safety first can choose titanium wire, the pursuit of the ultimate taste can choose nickel wire, and if this requirement is very high, and the use of the advantages of the latest control chip, you can consider 316L stainless steel wire. To avoid the nickel wire generated carbonyl nickel, but also to avoid the tin wire choking taste, the purpose of the other due to different materials, wire around the skills are different, titanium wire, 316L stainless steel wire can be close, and nickel wire can only loose around , Nickel wire can not burn red quenching stereotypes, and titanium wire and 316L stainless steel wire can be.

On the specifications: Each material of the heating wire are different specifications, different specifications diameter (thickness) is not the same.

On the carbon deposition: smoke in the fragrance of ingredients is evaporated to be sure to form carbon deposition, different smoke generated carbon deposition rate is different. Coke serious, the cotton out, the ignition for burning, the heat of the surface of the carbon deposition of high temperature to remove, wipe with water or rinse the coil surface, then restore the luster, you can insert the cotton to continue to use. It is recommended that a coil be used up to twice to burn the wire and clean it.

On the burning wire: We know that the heating wire is a heating element, through the battery-powered fever, so that the smoke next to the volatile oil, the formation of smoke, so when people suck to achieve "swallow" effect. DIY around the wire in the process, there will be a certain gap between the coil, and a process of burning wire allows us to shape the coil, to avoid the basis of jump, adjust the heating wire heat evenly, through the case of high temperature Surface to produce oxides, to avoid local short circuit. But also to remove impurities and dust in the production process.

Note: The burning wire described here is for normal use of power lines under the A1 wire or fancy yarn. Temperature control mode nickel, titanium heating wire does not need to burn operation. But 316 stainless steel heating wire is more special, can be temperature-controlled, such as in the power mode to be burned operation, in the temperature mode can not use the operation of burning wire.

Tips: the burning of the time, has not begun to turn red will first take a ray of smoke, this strand of smoke is in the high temperature, the surface of the heat generated oxide or dust is cleared of the smoke generated, smell It feels like a charred taste.

What is the difference between burning wire and not burning wire: before burning, the coil heat is not uniform, the local area of ​​different degrees of heat. After burning, heat evenly, the same degree of fever. Do not burn the case of adding cotton to add smoke to carry out the ignition operation and found that the smoke showed sparse uneven shape, remove the cotton and found that in the coil area under the local cotton has become deep, burning phenomenon, smoke into the Mouth, there will be a strong burning smell.

Burned into the cotton to add smoke to the ignition operation, the performance of the smoke at the rich, uniform distribution of the hair, out of cotton, found in the coil area under the cotton color and no signs of dark, no burned the situation