Studio : DEPEPE

Publisher : DEPEPE

Binding : Electronics

Product Description
Specification:
50pcs solder seal connectors
Shrink ratio 2:1
Diameter: 4.5 mm, cable cross-section 1.5-2.5 mm²(22-18AWG)
Minimum shrink temperature: 80°C / 176°F
Minimum solder melting temperature: 138°C / 280.4°F
Best shrink temperatures: 125°C - 130°C / 257°F - 266°F

Easy to use:
Strip the wires you wish to connect, slide the sleeve over one end of the wire, twist the wires together, slide the sleeve to cover the connection, apply heat via a heat gun, a lighter or small torch until the solder inside melts.

Features:
Can use a heat gun, a lighter or small torch to heat the connectors.
Transparent sleeve makes it easy to see if you have good overlap between the wires.

0