Subsystem:
Transducer: LF 1x 12-in cone; HF 1x 1-in exit, 1.75-in voice coil compression driver
Loading: LF Vented; HF Horn-loaded
Operating Mode:
Amplifier Channels: Single-amp LF/HF
External Signal Processing: High pass filter

The new VFR “i” revision brings the VF concept more fully into the EAW product line. VFR “i” Series black versions provides side handles and a handle designed into the rear of the cabinet. An installation only white version comes without handles or a pole mount cup.
The VFR129i two-way, full range loudspeaker system includes a direct radiating,vented, 12-in LF cone transducer and a 1-in exit / 1.75-in voice coil HF compression driver loaded with a large, square, user-rotatable 90×60 or 60×45 coverage pattern horn built on the classic MK Series horns. These horns deliver exceptional high frequency dispersion, and their square shape lets users “rotate the enclosure around the horn” to maintain directivity in a horizontal configuration. The standard horn is field replaceable with an optional 60×45 horn. This change incorporates a passive filter adjustment to maintain consistent acoustic response and smooth beamwidth throughout the crossover region.
Because VF Series full range systems (VFR/VFM) use HF sections similar to those developed for the MK Series, EAW engineers could employ the same revolutionary “beamwidth-matching” internal passive crossover/filter networks that set the MK Series apart from all other two-way systems. If powered by an EAW-specified amplifier or via a UX Series digital signal processor, the VFR129i can enjoy the benefits of EAW Focusing, a technology that eliminates the anomalies inherent in the time domain of any loudspeaker.
The VFR129i black version includes traditional portable features such as a pole-mount cup, parallel NL4 4-terminal connector, barrier strip connector, an optional transformer and handles that accept accessory covers for permanent installation. The white, installation-only versions omit handles and the pole-mount cup but include NL4 connector, barrier strip connector, an optional transformer, and multiple mounting points. The new design leaves the enclosure sides completely smooth and attractive. Optional rigging hardware is available for preconfigured arrays with VFS sub bass systems.
FEATURES
SPECIFICATIONS
CONFIGURATION
Subsystem:
Transducer: LF 1x 12-in cone; HF 1x 1-in exit, 1.75-in voice coil compression driver
Loading: LF Vented; HF Horn-loaded
Operating Mode:
Amplifier Channels: Single-amp LF/HF
External Signal Processing: High pass filter
PERFORMANCE
Operating Range (-10 dB, Hz)
50 – 20k
Axial Sensitivity (1W @ 1m, dB SPL)
Full Range Passive: 96
Power Handling / Impedance (Watts @ Ohms)
Full Range Passive: 500 @ 8
Calculated Maximum Output Peak (dB SPL)
Full Range Passive: 129
Calculated Maximum Output Long Term (dB SPL)
Full Range Passive: 123
Nominal Coverage (degrees)
Horizontal: 90
Vertical: 60
Subsystems
LF: 12-in cone, vented
HF: 1-in exit compression driver, horn-loaded
Powering
Full range
ORDERING DATA
Versions
EAW VFR129i Black 2040812-90
EAW VFR129i White 2040813-90
Dimensions (inches/millimeters)
Height: 25.69/659
Width (front): 16.2/412
Width (rear): 7.8/199
Depth: 16.4/417
Trap. Angle (degrees per side): 15
Weights (pounds/kilogram)
Net: 54/24.5
All of our EAW VFR129I passive speaker comes with a 1 year local warranty