The HD extender that overs one coaxial cable with IR control can offer the right way to send your HD signal to a long distances instead of using expensive HD cables. And， this device lets your existing coaxial cables or sockets perform the same function just like HD cable when you use it， and also can transfer the Deep Color (12 bits/color) video. All comes with a bandwidth up to 225MHz. And， if that weren’t enough， you can use your existing remote control device to control your device through an IR blaster.
Features:
Compatible with HD 1.3， HDCP 1.1 standards.
Supports digital video formats in Deep Color Mode at up to 36 bits (12bits/color) and 48KHz LPCM Digital audio.
Equalizes and recovers incoming TMDS data before re-transmitting it in high quality， regardless of the incoming signal quality.
Super IR control system， IR transport channel can be forward or backward.
Specifications:
Color: Black
Application: Multimedia
HD Transmitter ports: 1 * HD，1* IR TX， 1 * BNC
HD Receiver ports: 1 * HD， 1* IR RX， 1 * BNC
Power Supply: 2 * 5V 1A DC
ESD Protection Human body model: ±8kV (air-gap discharge)， ±4kV (contact discharge)
Operating Temperature: 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature: -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity: 20 ~ 90% RH (Non-condensing)
Main item size: 9.5 * 4.3 * 2.4cm / 3.74 * 1.70 * 0.91in (Transmitter / Receiver)
Main item weight: 92g / 3.26oz (Receiver)， 94g / 3.31oz (Transmitter)
Package size: 21.5 * 15.0 * 5.5cm / 8.64 * 5.91 * 2.17in
Package weight: 475g / 16.75oz
Connect and Operate:
Connect the signal source such as Blu-Ray Player， Play Station 3， audio/video receiver， cable or satellite receivers with HD output interfaces by a short high-speed HD cable to the HD Transmitter input. HD cable length should not exceed 16 ft.
Connect the HD Transmitter output BNC ports to included Receiver by using single RG6 coaxial cables. It is strongly recommended that factory terminated cable assemblies are used and their length shall not exceed 328 ft respectively.
Connect the HD output from the Receiver to high-definition display devices such as HD-LCD， HD-DLP and HD projectors with HD input interfaces. Use high-speed HD cables that are recommended for the distances that are required for each connection. HD cable length should not exceed 16 ft.
The source can be controlled from the display. It is accomplished by using an optional IR Receiver pigtail pointing away from the display， which can be connected to the receiver portion of the extender. And then the IR Transmitter pigtail is connected to the Transmitter of the extender and pointed at the source.
Package list:
1 * HD Transmitter
1 * HD Receiver
1 * IR Transmitter
1 * IR Receiver
2 * Power Adapter (The one for Transmitter， the other for Receiver)
1 * English User Manual
$$
$$
$$
$$
$$
$$
$$
$$
$$
$$
$$
$$
$$
$$
