Description:
50CM x 2M Floor Heating Film AC 220V Far Infrared Heating Film
Specifications: | Power supply | 230VAC， 50Hz | IP Grade | IP54 |
| Compression strength | 2750V | Tensile strength | 0.15mp/cm2 |
| Insulation grade | B1 | Ambient temperature | -40~+90Centigrade |
| Radiance | 75%~85% | Oxygen index | >31% |
| Thickness | 0.25mm | Wavelength of radiation | 8~15μm |
| The max breakdown voltage | 10，000V | Melting temperature | 110Centigrade |
| Flame retardant rating | UL94VO | Infrared energy | 756.9K/Square meter |
| Adhesive strength | 8.0kg/cm2 | The max surface temperature | 73 Centigrade |
Size: | Item No | Width(mm) | Thickness(mm) | Length(m/roll) | Weight (Kg) | Electric Consumption (Watt/m) |
| TF-705 | 500 | 0.25 | 2 | 0.6 | 110W |
Power consumption: 1.Only 150W power per square meter.
2.Means full loading: 0.2 kWh.
3.Electric film rated power is 220W/Square meter.
4.When the room reaches the set temperature，the system will enter standby mode.
5.Paved area of 70% of the room can achieve heating requirements.
6.Daily consumption per square meter is about 0.9 kWh.
7.Installed electric film heating system， are relying thermostat control，intermittent
work to make the room temperature is maintained constant.
8.According to the test， when the outdoor temperature is -6 degrees Celsius，the
indoor temperature want to maintain at 20 degrees Celsius，under the control of
the thermostat，electric film per day per square meter of actual working time is 4-8 hours.
Saving essentials:
(1) An electrical heating system of the room to do better warm insulation，electric film
actual working time will be shorter，thereby reducing power consumption.It is more
convenient than the boiler and more environmentally friendly.
(2) Install thermostats in each room， separate control.Close heating system when no
body in the room，thereby reducing the working area， to save power.It is the same
principle with central air condition， but more comfortable
Packing included:
1 x Heating film (No accessories)
