This product is suitable for repairing and reinforcing plastic parts of all cars. Such as bumper， dashboard， lamp holder， plastic ring， radiator， car and motorcycle plastic.<br /><br />Voltage:220V-250V<br /><br />1.In the welding， the RS nail inserted into the electrode will produce a high temperature of 500 ° C.<br />2.Note: wrong use will cause burns or fire hazards.<br />3.Use appropriate personal protective tools at work: heat resistant gloves and eye protection tools to prevent the nail from splattering when cutting.<br />4.IBefore inserting a nail， make sure the two electrodes are cooled.<br />5.In welding， please do not touch the nails and the electrodes.<br />6.Do not use near flammable liquids or objects.<br />7.Do not use in high humidity.<br />8.Turn off the power switch after use.<br />9.This class of products only applies to repair plastic.<br />10.Can be welded RSI6， RSI8， RS26， RS28， RS38 supplies.<br /><br />Directions for use:<br />1.The solder temperature is not adjustable， suitable for welding of plastic material of any thickness.<br />2.Select the appropriate type of welding nail， insert the ideal electrode mouth.<br />3.Weld the inner surface of the damaged part.<br />4.Press the start button， heat the melted plastic， the correct welding.<br />5.When melt welds go to the right place， loosen the button and wait for a few seconds to cool the plastic.<br />6.Repeat this work step until the nails are evenly distributed and then cut the protruding parts with the diagonal pliers.<br /><br />Package include：<br />1 x Welding machine<br />50 x M-type welding nails<br />50 x A-type welding nails<br />50 x Small wave welding nails<br />50 x U-type welding nails<br />1 x Copper head spatula<br />1 x Box